Making Copies; Using The Mfc As A Copier; Enter Copy Mode - Brother MFC-8440 User Manual

10

Making copies

Using the MFC as a copier

You can use your MFC as a copier, making up to 99 copies at a time.

Enter Copy mode

Before making copies, make sure that
in green. If it is not, press
default setting is Fax. You can change the number of seconds or
minutes that the MFC stays in Copy mode after a copy operation.
(See Setting the Mode Timer on page 4-6.)
The printable area of your MFC begins at approximately 2 mm from
the both ends and 3 mm from the top or bottom of the paper.
(Copy)
Ex: A4 (Document)
2mm
3mm
(Copy)
to enter Copy mode. The
A4 (Paper)
Unprintable
area
MAKING COPIES 10 - 1
is illuminated