Using Your Refrigerator; Setting The Controls - Kenmore 795.6800 Series Use & Care Manual

SETTING THE CONTROLS

AIRFLOW
In order to ensure proper temperatures, air must
between the refrigerator and freezer sections. As shown in
the illustration below, air enters at the top of the freezer
and circulates down. Air enters through the top vent of
the refrigerator, then circulates and exists at the bottom,
where it returns to the freezer.
When loading your refrigerator, make sure that items
do not block the air vents. Items that block air vents will
restrict air
TEMPERATURE
When changing control settings, wait 24 hours before
making additional adjustments. The controls are set
correctly when milk or juice is as cold as you would like
and when ice cream is
compartment is too cold or too warm, change the setting
one increment at a time. Wait 24 hours for the change to
stabilize before adjusting again.
TEMPERATURE ADJUST
Press the TEMPERATURE ADJUST button repeatedly to
select one of the temperature levels between COLD
and COLDER.

USING YOUR REFRIGERATOR

If the temperature in either
FREEZER CONTROL
Turn the temperature dial up or down to adjust the
temperature. Turn the dial up for a
colder temperature or down for a
warmer temperature.
Demo Mode (For Store Use Only)
Demo Mode disables all cooling in
the refrigerator and freezer sections to conserve energy
while on display in a retail store. When activated, OFF
will display on the control panel.
To deactivate:
Press the TEMPERATURE ADJUST button until your desired
temperature setting is reached. The OFF light will turn
once the Demo Mode is deactivated.
20