What Devices Can I Control; What Devices Do I Want To Control - Cisco AT8560 User Manual

What Devices Can I Control?

The mode keys arched across the top of the remote tell the remote which
device you want to operate.
Each mode key is associated with diff erent groups of devices.
You can use each mode key to control one of its associated devices:
Mode Key Associated Devices
CBL ........ set-tops, HDTV tuners, and satellite
............... devices
TV ........... TVs and HDTVs
VCR ........ VCRs, digital video recorders (DVRs), DVD
............... players, and CD players
DVD ........ DVD players, CD players, VCRs, and DVRs
AUX ........ receivers, tuners, and Home Theatre in a Box (HTIB)
Regarding Non-Responsive Modes
The AT8560 is pre-programmed with the TV, VCR, and AUX keys set to an
inactive (non-responsive) mode. After you program these keys on the remote
control, you can return them to the non-responsive mode by using the specifi c
non-responsive mode code found in the Code Tables, later in this guide.

What Devices Do I Want to Control?

To help you keep track of the devices you want to control, list the type of
devices you have (including brand) in the following table. Then use the code
tables at the end of this guide to locate the codes for your device. For example,
look under TV Group if you need to program the remote to operate your TV. If
you have two devices that use the same key, you must reassign the VCR, DVD,
or the AUX key. The TV and CBL keys cannot be reassigned. Go to Reassign
Mode Keys. Otherwise, go to Program the Remote to Control My Devices
for additional instructions.
Example: DVD
6
DVD Sony 2066, 2193
T11208