Cisco AT8560 User Manual page 20

Restoring Default On Demand Settings (Program Code 9 9 6)
1. Press and hold CBL and SELECT until all mode keys blink twice.
2. Press 9 9 6. The CBL LED blinks twice.
3. Press SELECT to reset the On Demand control to the default code.
Notes:
• If the procedure is successful, all LEDs blink three times.
• If you make an error or if the procedure does not work, the LED displays a
long blink. A long blink also indicates a timeout has occurred. Repeat the
procedure from step 1.
• After restoring the default On Demand settings, the OnDemand key will
only send On Demand code in CBL mode.
18