Which Code Worked - Cisco AT8560 User Manual

Which Code Worked?

Find out which code programmed the mode key to control your device.
Finding the Code That Worked (Program Code 9 9 0)
1. Press and hold SELECT and the appropriate mode key (CBL, TV, VCR, DVD,
or AUX) until all mode keys blink twice.
2. Press 9 9 0. The mode key you selected in step 1 blinks twice.
3. Press 1 and then count the number of times the mode key blinks. The
number of blinks indicates the fi rst digit in the code. For example, 4 blinks
indicates the fi rst digit in the code is 4. If the mode key does not blink, the
digit is 0.
4. Press 2 and then count the number of times the mode key blinks. This
number indicates the second number in the code.
5. Press 3 and then count the number of times the mode key blinks. This
number indicates the third number in the code.
6. Press 4 and then count the number of times the mode key blinks. This
number indicates the fourth number in the code.
Note: After all four numbers in the code are identifi ed, all mode keys blink
three times.
7. Record the code in the space provided on the cover of this guide. You may
need it again if the device code is accidentally erased.
10