Where Do I Start - Cisco AT8560 User Manual

Where Do I Start?

Before you begin using your remote, complete the following initial setup tasks.
Install the Batteries
The remote requires two AA batteries (alkaline recommended). A diagram in the
battery compartment of the remote indicates proper placement of the batteries.
When batteries are properly installed, the light on the remote blinks each time a
key is pressed.
Visit the Quick Reference
Timing is often important when you program advanced features. Therefore,
knowing where certain keys are on the remote gives you an edge in pressing the
right key at the right time.
Important Information About Power Control
We strongly recommend that you turn off your set-top every time you turn off
your TV. To make this easier, you can program your remote to turn both devices
on or off at the same time. After you program the remote to control your four
favorite entertainment devices, see Change Power Control to learn more
about programming your remote to control power for the TV and set-top at the
same time.
Find a Place to Store Your Remote
Keeping up with one remote is much easier than keeping up with fi ve remotes.
However, it is still a good idea to fi nd a storage location for your remote. The
AT8560 is not a toy. It should be kept out of the reach of children under the age
of 6 years.
3