Download Print this page

Cisco AT6400 User Manual

Alltouch infrared (ir) universal remote control.
Hide thumbs

Advertisement

UNIVERSAL REMOTE
CONTROL GUIDE
Service provided by
"We Keep You Connected"

Advertisement

   Related Manuals for Cisco AT6400

   Summary of Contents for Cisco AT6400

  • Page 1

    UNIVERSAL REMOTE CONTROL GUIDE Service provided by “We Keep You Connected”...

  • Page 2

    UNIVERSAL REMOTE CONTROL Your new AT6400 AllTouch Infrared (IR) Universal Remote Control (remote) is a true universal remote, functioning as four remotes in one. As one example, you can use this remote to operate your Set Top Box, your TV, and two other devices, such as a DVD player and VCR.

  • Page 3

    Keeping up with one remote is much easier than keeping up with four or five remotes. However, it is still a good idea to find a storage location for your remote. The AT6400 is not a toy. It should be kept out of the reach of children under the age of 6 years.

  • Page 4

    UNIVERSAL REMOTE CONTROL 5. Point the remote at the device, and press POWER to test the device. 6. Did the device power off? • If YES, write this code number in the table found on page 38. You may need it again if the device code is accidently erased.

  • Page 5

    UNIVERSAL REMOTE CONTROL 2. Point the remote at the device. 3. Press and while holding a selected mode key (TV or DVD), press the OK key. For example, to search for a TV code, press and hold TV and OK at the same time. 4.

  • Page 6

    UNIVERSAL REMOTE CONTROL 1. = VCR 2. = Receiver/Tuners 3. = Amplifiers 4. = HTIB (Home Theater in a Box) 7. Point the remote toward the device, and press PLAY. 8. Your device powers off when it finds the correct code. Then choose one of the following options: • Save code and exit –...

  • Page 7

    UNIVERSAL REMOTE CONTROL Some common examples: • To program the AUX key to operate your DVD player, press DVD and then AUX. • To program the DVD key to operate your TV, press TV and then DVD. 10. CHANGE VOLUME CONTROL By default, once the TV mode key is programmed with a valid code, the volume and mute buttons control your TV.

  • Page 8

    UNIVERSAL REMOTE CONTROL After you press the ENTER key, the volume keys control the device assigned to that mode. For example, in TV mode, the volume keys control volume for the TV only. NOTES: • If any other key is pressed except the Mode keys and the ENTER key, the remote does not accept any changes or updates. The STB mode key displays a long red flash and the remote returns to normal operation. • If the remote times out before you complete programming volume control, the remote does not accept any changes.

  • Page 9

    UNIVERSAL REMOTE CONTROL After you press the ENTER key, the channel key now controls the device associated with the mode key you select. For example, in TV mode, the channel key controls the TV, but in STB mode, the channel key controls the Set Top Box. NOTES: • If any other key is pressed, except the Mode keys and the ENTER key, the remote does not accept any changes or updates. The STB mode key displays a long red flash and the remote returns to normal operation.

  • Page 10: Troubleshooting

    UNIVERSAL REMOTE CONTROL After you select a mode, the POWER key controls the device assigned to that mode. For example, in TV mode, the remote controls power for the TV only. NOTES: • If any other key is pressed except the Mode keys and the ENTER key, the remote does not accept any changes or updates. The STB mode key displays a long red flash and the remote returns to normal operation. • If the remote times out before you complete programming power switch control, the remote does not accept any changes.

  • Page 11

    UNIVERSAL REMOTE CONTROL CHECK THE DEVICE • Is the device’s power cord connected to the power outlet? • Is the device switched on? CHECK THE IR DATABASE CODES LIST • Is the device brand name for the device listed in the code list? • If yes and there is more than one code listed, try using a different code to provide more functionality. • If no, try the following: - Use the Auto-Search function to find a usable code. - If the Auto-Search function is unable to find a usable code, you may need to use the original remote provided with the device.

  • Page 12

    REMOTE CONTROL QUICK REFERENCE Control devices with mode buttons Record TV with one click Replay the last few seconds Fast forward in set increments of a program Go to recorded TV programs list Go to the On Demand Library (Coming Soon) Access online photos, games Return to previous menu and more on TV (Coming Soon) screen Navigate channels, menus...

Comments to this Manuals

Symbols: 0
Latest comments:
  • Jim Aug 17, 2018 01:33:
    Is not specific on how to program for a sound bar