Put It Back The Way I Got It - Cisco AT8560 User Manual

Put It Back the Way I Got It

Return specifi c advanced functions or all advanced functions back to their
original settings. Choose the procedure that fi ts your needs.
Important: Your service provider may have programmed the dual power control
feature for your convenience. Therefore, if you reset the power control, you may
need to program the remote to control the power for the set-top and TV at the
same time.
Resetting Mode Keys (Program Code 9 9 2)
You can reprogram the VCR key and the AUX key to operate in their original modes.
1. Press and hold CBL and SELECT until all mode keys blink twice.
2. Press 9 9 2. The CBL key blinks twice.
3. Do one of the following:
• If you are returning the VCR key to its original state, press VCR twice.
• If you are returning the AUX key to its original state, press AUX twice.
Result: All mode keys blink three times.
4. Repeat this procedure if you want to return both keys to their original modes.
Resetting Device Codes and Mode Keys (Program Code 9 7 7)
Follow this procedure to return programmed device codes and mode keys to their
original settings. This procedure erases device codes you programmed. In addition,
this procedure returns all reassigned mode keys to their original operation.
This reset procedure does not reset any changes you made to power, volume,
or channel control.
1. Press and hold SELECT and CBL until all mode keys blink twice.
2. Press 9 7 7. All mode keys blink three times. Then, after a few seconds the
CBL key blinks twice.
Resetting Power, Volume, and Channel Control (Program
Code 9 8 0)
Follow this procedure to return power, volume, and channel control to their
original settings. This reset procedure does not reset any device codes you
programmed or aff ect mode key reassignments.
1. Press and hold SELECT and CBL until all mode keys blink twice.
2. Press 9 8 0. All mode keys blink three times.
Resetting All Changes (Program Code 9 8 1)
Follow this procedure to return the remote completely back to its original settings.
1. Press and hold SELECT and CBL until all mode keys blink twice.
2. Press 9 8 1. All mode keys blink three times. Then, after a few seconds the
CBL key blinks twice.
16