What If None Of The Codes Work - Cisco AT8560 User Manual

What If None of the Codes Work?

If none of the codes listed for your brand of device operate the device correctly,
you can search through the code library for a valid code.
Improving Your Reaction Time
When you search the code library, you need to be ready to press SELECT as
soon as the remote turns off your device. Therefore, make sure you are familiar
with the location of the SELECT key before you begin this procedure.
Sizing Up the Libraries
The mode keys blink twice when the remote reaches the last code in a library.
You do not need to count codes. However, knowing the size of each library will
help you determine how long it will take to cycle through all of the codes in the
library. Each library contains the following number of codes:
• CBL mode: 45
• VCR mode: 122
• CD mode: 26
Searching the Code Library (Program Code 9 9 1)
1. Turn on the device.
2. Press and hold SELECT and the appropriate mode key (CBL, TV, VCR, DVD,
or AUX) until the mode keys blink twice. For example, to search for a TV
code, press and hold SELECT and TV at the same time.
Note: If you reassigned mode keys, you may, for example, press SELECT
and VCR to search for a TV code to assign to the VCR mode key.
3. Press 9 9 1. The mode key you selected in step 2 blinks twice.
4. Point the remote toward the device, and press PLAY
automatically tests each code in its library, beginning with the most common
codes. The mode key blinks once each time the remote transmits a new
code. All mode keys blink three times when it reaches the last code.
5. As soon as the device powers off , press SELECT.
6. Verify the new code is correct by pressing POWER.
7. Did the device power on again?
• If yes, press SELECT to assign the code.
• If no, complete the following steps:
a) Turn the device on.
b) Press
c) When the device turns off , press SELECT to assign the code.
8. Go to Which Code Worked to identify the code that controls your device.
After you identify the code, record the code in the space provided on the
cover of this guide.
• TV mode: 352
• SAT mode: 53
or to step forward or back to the correct code.
• DVD mode: 229
• AUDIO mode: 133
. The remote
9