Table of Contents
Advertisement
SEND REPORT? COMMANDs 41 & 42
Description
•
This function tests the communication link between your security system and your
security company. It is an important part of maintaining a high level of security for your
property.
•
Two types of test reports may be sent. The first type of report is a simple test report
(Command 41). The second type of report is a status report (Command 42). This status
report indicates the current condition of your system.
Using Send Report:
1. Always call your security company before sending a test report.
2. Ensure your command center is at idle text.
3. Press the COMMAND bar. The display shows SYSTEM COMMAND.
4. Press the 4 key, then press the 1 key.
Note: If you prefer, you may use the Command Menu in place of steps 3 and 4 to
initiate this function. Press the MENU key to enter the Command Menu, then
press NEXT repeatedly until you reach the SENT REPORT ? prompt. Press
ENT.
5. TEST REPORT? displays.
•
If you wish to send a test report, press ENT.
•
If you wish to send a status report, press NEXT to display STATUS
REPORT ?. Press ENT.
6. The command center displays SENDING REPORT until the report is transmit-
ted to the security company. When the transmission is complete the command
center displays REPORT SENT for 5 seconds and then returns to idle text.
7. If ESC is entered the display will return to idle text. If the test (or status) report
doesn 't successfully transmit to the central station, the command center will
display COMM FAIL after numerous unsuccessful attempts.
Advertisement
Table of Contents
