Print Log - National Security Systems Security System Owner's Manual

PRINT LOG ?

Description
• The Print Log function lets you print the events stored in your security system's log. You
can choose to print the entire log or set a start date and print the events recorded from
that date up to today.
• Your system must include a printer interface and a printer to perform this function.
Using Print Log
1. Ensure your command center is at idle text.
2. Press 9 and then 9 again and then ENT.
Note: If you prefer, you may use the Command Menu in place of steps 2 and 3 to
initiate this function. Press the MENU key to enter the Command Menu, then
press NEXT repeatedly until you reach the PRINT LOG ? prompt. Press ENT.
3. VIEW LOG ? displays.
• Press NEXT until PRINT LOG ? scrolls into the display.
4. Press ENT.
5. ENTER START DATE displays.
• To print part of the log, enter the date (month and day, MMDD) at which you
wish to start the review. Press ENT.
• To print the entire log, press ENT without entering a start date.
6. PRINTING EVENTS displays during printing. Each event appears in a line that
includes the date and time, area and type of event. See your printer interface
user's guide for more information.