National Security Systems Security System Owner's Manual page 17

DEL PASSCODES ? COMMAND 53
Description
•
Use this function to delete a personal passcode from your system without assistance
from your security company. You need to know the user number for the passcode you
want to delete.
•
The two digit user numbers identify users in reports transmitted from your system.
Using Del Passcodes:
1. Ensure your command center is at idle text.
2. Press the COMMAND bar. The display shows SYSTEM COMMAND.
3. Press the 5 key, then press the 3 key.
Note: If you prefer, you may use the Command Menu in place of steps 2 and 3 to
initiate this function. Press the MENU key to enter the Command Menu, then
press NEXT repeatedly until you reach the DEL PASSCODES ? prompt.
Press ENT.
4. The command center displays ENTER USER NUM. Enter the two-digit user
number, not the passcode. Press ENT.
• If you enter a user number not programmed into the system, NOT IN USE
displays. Check the user number and enter again.
5. DELETE USER ## ? displays. Press ENT to delete the passcode for this
user.
6. The command center briefly displays PASSCODE DELETED and then
returns to idle disarmed text.