Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for National Security Systems Security System
Summary of Contents for National Security Systems Security System
- Page 1 Security System User's Guide National Security Systems Inc (800)457-1999...
-
Page 2: Security System Glossary
Security System Glossary security system so you can enter an armed building through a delay door. Once the delay door is opened, the entry delay time begins. If the security system is not disarmed before the delay time expires, the system goes into alarm. - Page 3 A faulted zone will not be armed with the rest of the system if restored opening and closing reports. and will not be armed until I disarm the security system and re-enter Force arming can be programmed to apply to most arming commands as a master arming command.
- Page 4 A duress passcode is used to send a silent alarm signal to the Central COMMAND bar), increasing the last digit of the security passcode by one Station. It arms or disarms the security system just like your personal will also send a duress signal to the Central Station.
-
Page 5: Ready To Arm
The Command Center makes it easy for you to have complete control of The system is now in the Selective Zone Shunting mode. Zones 1-9 are your security system. By using Selective Zone Shunting you have the displayed on the top line of the display and zones 10-16 are displayed ability to bypass zones you do not wish to arm, directly from the Command on the bottom line. -
Page 6: System Command
Police Alert COMMAND Using COMMAND 9: Display: I have this feature. SYSTEM COMMAND I do not have this feature. 1. Press the COMMAND bar. By using COMMAND 9, you immediately send an emergency signal to the READY TO ARM Central Station to summon the police. COMMAND 9 can be programmed 2. - Page 7 COMMAND 3. In commercial systems, when you need access to the large overhead doors 5. To disarm your security system, enter your personal passcode and to receive deliveries, using COMMAND 8 will allow you to keep the rest press ENT before the delay time expires.
- Page 8 Special Alert COMMAND Using COMMAND 7: Display: I have this feature. I do not have this feature. 1. Press the COMMAND bar. READY TO ARM (custom text) This command is a manually operated and initiated alarm command. COMMAND 7 is programmed by your alarm technician to alert the Central 2.
- Page 9 Display: I have this feature. I do not have this feature. READY TO ARM 1. Ensure that your security system is disarmed. (custom text) COMMAND 6 is used to monitor the perimeter of your building when the system is disarmed. This is called the Perimeter Watch Mode. When in this...
- Page 10 SYSTEM COMMAND 3. Press the Notes Before Beginning: PASSCODE CHANGE Your security system is now in the passcode change mode. • The first and last digits of your new passcode should NOT be the same. • Care should be given when entering a passcode containing the same 4.
-
Page 11: Reset Detectors
Display: I have this feature. I do not have this feature. READY TO ARM 1. Ensure that your security system is (custom text) disarmed. By using COMMAND 47, you are able to reset faulted detection devices from your Command Center. Devices might include smoke detectors, shock sensors or a variety of other detection devices. - Page 12 READY TO ARM disarmed. (custom text) It is easy for you to test your security system without sending reports to the Central Station. This local system test is performed only when the security SYSTEM COMMAND 2. Press the COMMAND bar.
- Page 13 I do not have this feature. performed. Your security system has the ability to be managed remotely from the 4. When the operator directs you, enter COMMAND 43 at your Central Station without having a serviceperson on the protected premises.
- Page 14 1. Ensure that your security system is disarmed. (custom text) Testing the communication link between your security system and the Central Station is an important part in maintaining high level security for SYSTEM COMMAND your property. The Command Center minimizes the time and trouble of 2.
- Page 15 Using COMMAND 4: Display: 1. Ensure that your security system is READY TO ARM COMMAND 4 performs two functions for your security system. Use this disarmed. (custom text) command to silence your Command Center sounders during service alert, and to reset the Command Center alarm memory.
- Page 16 PERIMETR DELAYED delay time has expired and the system you are on the premises but not yet open for business. (custom text) becomes armed. 5. To disarm your security system, enter your personal passcode and press before the delay time expires.
-
Page 17: Perimetr Instant
4. To disarm your security system, enter your personal passcode and press In commercial installations, this arming command is useful when you are working late and you want the perimeter of the building armed until you... - Page 18 ENT . If your system reports to a Central Station, you may need to call them if an alarm 5. To disarm your security system, enter your personal passcode and occurs. press ENT before the delay time expires. Application...
- Page 19 ALARM ZONE # line shows the zone's custom display. (custom zone text) Indicates that only part of the perimeter PERIMETR PARTIAL Indicates the security system is armed protection is armed. ALL SECURE (custom text) and ready to detect intruders. (custom text)
- Page 20 4. Watch Tone: When the Perimeter Watch Mode is activated, the Command Center emits a brief tone to alert you when any perimeter conditions of your security system. An additional bell or siren may also be mounted on the exterior of your premises to alert your neighbors of an zone is faulted.
- Page 21 ENT , and the alarm will stop. To silence your Command Center during a service alert, Your security system automatically disconnects your telephone from its line when transmitting reports to the Central Station. This prevents alarm press COMMAND signals from being interrupted during transmission.
-
Page 22: Security System
Arming (Turning-On) Your Security System Security System Your security system can be armed in many different ways, depending on Your security system is disarmed by entering your personal passcode. When your system is armed, you must enter the premises through a the arming command used. -
Page 23: Digital Keypad
(Enter) key to activate the passcode. If you do not press the ENT key, The Command Center has a lighted digital keypad used to enter passcodes and system commands into the security system. As you touch the keys to the passcode is ignored by the security system. System commands (entries... - Page 24 The Command Center is an illuminated digital arming station that is the English Text Display control center of your entire security system. The Command Center does The English Text Display is backlit and consists of two lines (16 characters much more than just arm (turn-on) and disarm (turn-off) your security each) of English text.
-
Page 25: Function Keys
ENGLISH ARMED TEXT STATUS DIGITAL DISPLAY INDICATOR KEYPAD ARMED COMMAND BAR COMMAND ENTER SOUNDER FUNCTION KEYS... -
Page 26: Maintenance And Service
The D636 Command Center Maintenance and Service Your security system helps to secure life, property and investments The D636 Command Center requires very little maintenance, however, against fire, theft, and bodily harm. The digitally advanced D636 Command the system should be tested weekly to insure early detection of a need Center offers a variety of features unavailable with any other system. -
Page 27: Fire Safety
Fire Safety Plan and practice an escape plan. A fire alarm warning may be wasted unless the family has planned for a quick evacuation. Because there may be very little time between detection of a fire and the time it Residential fire is a leading cause of accidental death.