National Security Systems Security System Owner's Manual page 13

Hide thumbs Also See for Security System:
Table of Contents

Advertisement

Change Display COMMAND 49
This function presents three options. One is to dim the display, one to brighten the
display, and one to continuously show the time and date in the display.
Bright/Dim
You can change your command center's display to make it bright or dim. When the
display is dim, the tones are softer than those when the display is bright. Use this option
for command centers in bedrooms where a brighter display and louder tones could
interfere with sleep.
If you dim the command center display and an alarm or trouble condition arises, the
display automatically brightens and the volume increases. The display returns
to dim lighting when you clear the alarm or trouble condition.
Continuous Time/Date
Use this function to replace the disarmed idle text with a continuous time and
date display.
Use this function to prevent passersby from knowing the status of your system.
Any time your command center has an event to display, the time and date
display are automatically removed. To return the time and date display, you
must perform this function again.
1. Ensure that your command center is at idle text.
2. Press the COMMAND bar. The display shows SYSTEM COMMAND.
3. Press the 4 key, followed by the 9 key.
Note: If you prefer, you may use the Command Menu in place of steps 2 and 3 to
initiate this function. Press the MENU key to enter the Command Menu, then
press NEXT repeatedly until you reach the CHG DISPLAY ? prompt. Press
ENT.
4. The display shows BRIGHT DISPLAY ?. Press ENT to brighten the display.
5. If you wish to dim the display or continuously show the date and time, press
NEXT.
6. The display shows DIM DISPLAY ?. Press ENT to dim the display.
7. If you wish to continuously show the time and date, press NEXT. Note: If
your system is turned on (armed), you cannot display the time.
8. TIME DISPLAY ? displays. Press ENT to continuously show the date and time.
9. Pressing ESC with the time and date showing returns the display to idle text.

Advertisement

Table of Contents
loading

Related Products for National Security Systems Security System

Table of Contents