MOTU UltraLite- mk3 Hybrid User Manual page 59

Using CueMix FX
If your host audio software does not support direct
hardware monitoring, you run CueMix FX side-
by-side with your audio software and manage your
monitor mix in CueMix FX.
CueMix FX allows you to create up to eight
separate UltraLite-mk3 monitor mixes, or any
other desired routing configurations. These
routings are independent of your host audio
software. For complete details, see chapter 10,
"CueMix FX" (page 61).
Controlling CueMix FX from your audio
software
Some ASIO-compatible audio applications, such as
Cubase and Nuendo, allow you to control
CueMix FX monitoring from within the
application (without the need to use CueMix FX).
In most cases, this support consists of patching an
UltraLite-mk3 input directly to an output when
you record-arm a track. Exactly how this is
handled depends on the application.
CueMix FX routings that are made via host
applications are made "under the hood", which
means that you won't see them in CueMix FX.
However, CueMix FX connections made inside
your host audio software dovetail with any other
R E D U C I N G M O N I T O R I N G L A T E N C Y
mixes you've set up in CueMix FX. For example, if
your host application routes audio to an output
pair that is already being used in CueMix FX for an
entirely separate mix bus, both audio streams will
simply be merged to the output.
Controlling CueMix FX from within Cubase or
Nuendo
To turn on CueMix in Cubase SX or Nuendo,
enable the Direct Monitoring check box in the
Device Setup window (Figure 7-2 on page 45).
Other ASIO 2.0-compatible host software
If your ASIO-compatible host audio software
supports ASIO's direct monitoring feature, consult
your software documentation to learn how to
enable this feature. Once enabled, it should work
similarly as described for Cubase (as explained in
the previous section).
Using CueMix FX with WDM- or Wave-
compatible software
Run CueMix FX (chapter 10, "CueMix FX"
(page 61)) and use it to route live inputs directly to
outputs, control their volume and panning, etc. If
necessary, you can save your CueMix Console
setup with your project file.
59