Canon PowerShot S1 IS User Manual page 57

The recording time may not display properly
during shooting or filming may stop
unexpectedly with the following types of CF
cards.
- Slow recording cards
- Cards formatted on a different camera or a
computer
- Cards which have had images recorded and
erased repeatedly
Although the recording time may not display
properly during shooting, the movie will be
recorded correctly on the CF card. Recording
time will display properly if you format the CF
card in this camera (excluding slow recording
CF cards).
Be careful not to touch the microphone while
shooting.
If the indicator blinks after a shot, this
indicates that the movie is being written to the
CF card. You cannot shoot again until it stops
blinking.
When the camera's internal temperature
rises, appears in red on the lower left
corner of the LCD monitor (or viewfinder). If
the temperature continues to rise, shooting
ends automatically to protect the CF card or
micro drive from overheating, the
[Overheated! Shutting down.] message
appears and the camera powers off. If this
happens, store the camera for approximately
30 minutes and wait until it has completely
cooled down before resuming use. The CF
card or micro drive may heat up but this does
not constitute a malfunction. However, for still
image shooting, there is no need to wait 30
minutes before resuming use.
See page 166 for settings that can be changed in
this mode.
See page 32 for resolution and frame rate
information.
Sound is recorded monaurally.
There is no shutter sound in Movie mode.
QuickTime 3.0 or higher is required to play back
movie files (AVI/Motion JPEG) on a computer.
(QuickTime (for Windows) is bundled on the supplied
Digital Camera Solution Disk. On the Macintosh
platform, QuickTime 3.0 or later is generally bundled
with Mac OS 8.5 or later operating system.)
5. Useful Shooting Functions 55