Canon PowerShot S1 IS User Manual page 37

a
a a a a Press the
button to switch between
flash modes and shoot the image.
The selected flash mode appears on the LCD
monitor (or viewfinder).
You can switch between settings by pressing
the button. The flash setting may not switch
with certain shooting modes.
When the red-eye reduction function is on (p. 36)
When the red-eye reduction function is off
Be sure to close the flash after use.
When the Flash Pop-up Function is Set to [Off]
Mode Dial
You can manually set the flash when Flash
Pop-up is set to [Off].
Flash is open ( )
Flash is closed ( )
a
a a a a Pop up the flash by pressing the
button and shoot the image.
b b b b When you are not using the flash,
press the flash down until it clicks.
The flash always fires.
The flash does not fire.
b
2. Shooting-The Basics 35