Canon PowerShot S1 IS User Manual page 129

3
Select images for transferring.
Single Images
Select an image using the
or arrow and mark or
remove marks from images
using the or
check mark ( ) appears on
the marked image.
You can use the same procedures to select
images in index playback (3 images). Turn the
zoom lever toward
image playback and index playback.
All the Images on a CF Card
Turn the zoom lever
toward to switch to
index playback (3 images).
Press the SET button and
select [Mark all] using the
or arrow, then press the SET button again
to select all the images.
If you select [Clear all] instead or [Mark all], you
cam remove marks from all the images.
arrow. A
to switch between single
You can select images using the
and change the settings using the
arrow after [Mark all] or [Clear all] has been
selected.
4
Press the MENU button.
The selection mode will turn off and the Transfer
Order menu will reappear.
Images are transferred in order from oldest to
newest by the shooting date.
A maximum of 998 images can be marked per
CF card.
or arrow
or
9. Additional Features 127