Canon PowerShot S1 IS User Manual page 115

Registering a Start-up
Image
Select the image you wish
to register using the
arrow and press the SET
button.
Registering Start-up,
Operation, Self-timer and
Shutter Sounds
Select (Record) using
the or arrow and press
the SET button.
Recording will start and automatically stop
when the time is exceeded.
Start-up Sound: 1 sec.
Self-timer Sound: 2 sec.
Select (Register) and press the SET button.
5
Select [OK] using the
and press the SET button.
or
Operation Sound: 0.3 sec.
Shutter Sound: 0.3 sec.
or arrow
Sounds recorded using the Sound Memo
function (p. 101) and movies cannot be
registered as My Camera settings.
When you register new My Camera settings,
the previously registered settings are erased.
File Format of My Camera Settings
My Camera settings should conform to the below file
formats. However, CF card images shot with this
camera can be registered as My Camera settings
regardless of the below formats.
Start-up Image
- Recording image format JPEG (Base line JPEG)
- Sampling rate
- Image size
- File size
Start-up Sound, Operation Sound, Selftimer
Sound and Shutter Sound
- Recording format
- Quantization bit
- Sampling frequency 11.025 kHz and 8.000 kHz
4:2:0 or 4:2:2
320 x 240 pixels
20 KB or less
WAVE (monaural)
8 bit
8. Camera Settings 113