Turning The Power On/Off - Canon PowerShot S1 IS User Manual

a
b
Indicator
a a a a Select [OK] using the
on the omni selector, then press the
SET button.
The indicator blinks red and formatting starts. Wait
until the indicator goes off.
To cancel instead of erasing, select [Cancel] and
press the SET button.
b b b b Press the MENU button.

Turning the Power On/Off

The power/mode indicator remains lit while the power of
the camera is on. The power/mode indicator indicates
the state of the camera as follows.
Orange: Shooting mode
Green: Playback mode/Printer connection mode*
Yellow: Computer connection mode*
Off:
or arrow
*
For printer connection mode, see the Direct Print User
Guide. For computer connection mode, see the
Canon Digital Camera Software Starter Guide Disk.
The power of the camera is off.
You will hear a start-up sound and see the start-
up image when the power comes on (p. 111).
The start-up image does not appear when the
viewfinder display is on in Shooting mode or
the A/V OUT terminal is connected to a TV.
Be careful not to touch the lens when shooting.
Please also refrain from forcing the lens with
fingers or other objects. It could lead to
malfunctions or damage the camera. If this
occurs, turn the camera off and back on.
Turning on the camera without the start-up
sound and image
Press and hold the
power. You can also turn the power on with the
LCD monitor closed.
button, then turn on the
1. Preparing the Camera 19