About Printing - Canon PowerShot S1 IS User Manual

4
Turn on the TV and switch it to Video
mode.
5
Power the camera into Shooting
mode or Playback mode (p. 19).
The image will appear on the TV. Shoot or play
back images as usual.
No image will appear on the LCD monitor (or
viewfinder) when the camera is connected to a
TV monitor.
The video output signal can be switched
(NTSC or PAL) to accommodate different
regional standards. The default setting will vary
between regions.
NTSC:Japan, U.S.A., Canada, Taiwan, etc.
PAL:Europe, Asia (excluding Taiwan),
Oceania, etc.
If an incorrect vide system is set, the output
image will not display properly.
If the TV is a stereo model, you can plug the
audio plug into either the left or right Audio In
jack. Please refer to the TV's manual for details.
A TV set cannot be used in the
Assist) mode.

About Printing

There are two ways of printing images shot
with this camera.
You can easily print images stored in the CF card
by connecting the camera to a direct print
compatible printer
camera buttons.
You can specify the images on your CF card you
want to print and how many copies you want
(DPOF
to a participating photo lab that supports DPOF to
have them printed out later.
*1
This camera complies with the industry standard
PictBridge, therefore, you can connect the camera
to non-Canon PictBridge compliant printers and
print images.
*2
Digital Print Order Format
This manual explains the DPOF print settings. For
information on how to print images, refer to the
Direct Print User Guide supplied with the camera.
Also, refer to your printer's manual.
(Stitch
*1
with a cable and operating the
*2
Print Settings), and then take the CF card
9. Additional Features 119