Keyboard And Heat Plate - NEC VERSA VXi Service And Reference Manual

Keyboard and Heat Plate

Remove the keyboard and heat plate as follows.
Remove the LCD panel from the system.
1.
Partially lift the keyboard up and toward the back of the system to clear the tabs from under
2.
the top cover.
Lay the keyboard key side down over the back of the system.
3.
Locate and completely loosen the four screws in order (1, 2, 3, and 4) securing the heat
4.
plate to the system. Do not attempt to remove the screws. When reassembling, tighten the
screws in order (1, 2, 3, and 4).
3-10 Disassembly and Reassembly
Lifting the keyboard
Loosening the heat plate screws
A – Screws B – Heat Plate