Table of Contents
Advertisement
Option
CPU Speed Control
Hard Disk Timeout
Video Timeout
Peripheral Timeout
Audio Device Timeout
Standby Timeout
Auto Suspend Timeout
LCD Suspend — Allows you to suspend the system when the LCD panel is closed.
!
Suspend Option — Specifies either Suspend or Save to File (STF) as the default power
!
management mode.
Automatic STF — Enables the system, after 30 minutes in Suspend mode, to save the
!
current working environment to a special file on the hard disk and to power down the
system.
If Auto Save to File is set to Off and the save-to-file area is present on the hard drive,
pressing the
Panel Brightness — Selects the LCD screen brightness.
!
Suspend Warning Tone — Specifies whether the system warning tone sounds when
!
Suspend mode starts. It is best to keep this option enabled.
Wake Up from Suspend Alarm/Resume Alarm Time — Allows the alarm to wake up the
!
system from Suspend. Designates the time parameter in five minutes increments.(Not
applicable in Windows 98/2000 with ACPI.)
Intel SpeedStep Technology — Optimizes CPU performance when the system is powered
!
by AC or by battery.
2-18 System Configuration and Setup
Custom Timeout Options
Definition
Sets CPU performance at one of four levels.
Sets the time delay before the hard disk powers
down.
Sets whether to timeout the video or not.
Sets whether to timeout the peripheral or not.
Sets the time delay before the audio device powers
off.
Selects the system standby timeout period.
Defines how much time elapses before the Suspend
Option occurs (Suspend or Save to File).
key combination puts the system into Save to File mode.
Fn-Power/Sleep
Advertisement
Table of Contents
Troubleshooting
