Controller Priority Function - Bosch BC2600RA Owner's Manual

Controller Priority Function

Hot water supplied from this appliance is delivered to the kitchen, washroom, and shower, etc. at the
same temperature.
The water temperature can only be changed by one remote controller if a number of remote controllers
are installed.
"Priority" indicates that the hot water temperature can be adjusted by that controller.
• The remote controller on which the operation button is turned "on" has priority.
• If the Bathroom or Sub controller has priority left ON, press OFF & ON on the Main or Sub controller
to transfer priority to the Main or Subcontroller (Except when hot water is operating).
When the temperature cannot be adjusted, follow the procedure below. <Priority button>
Temperature cannot be adjusted
Off
Priority
Off
Priority
Off
Hot Water Temp
Priority
Burner on
18
Operating Instructions
Bath Fill
Burner on
Temp.
Turn off the
operation button.
Bath Fill
Burner on
Temp.
* Care must be taken as operation is interrupted.
Turn off the
operation button.
Set Time
ON/OFF
* Care must be taken as operation is interrupted.
Priority
Switch priority
Press the priority button
Priority
Turn on the operation
button once again.
Off
Turn on the operation
button once again.
Set Time
ON/OFF
(Temperature settings for example.)
Temperature can be adjusted
On
Priority Burner on
On
Priority Burner on
On
On
Hot Water Temp
Priority
Burner on
Bath Fill
Temp.
Bath Fill
Temp.