Clock Adjustment - Bosch BC2600RA Owner's Manual

Clock Adjustment

(Main Controller)
Main Controller
Priority Burner on
Press 2sec.
YPRM67XB to set time
1
Press the Set
Time Button
(Until "0:00" is flashing)
Set Time Set Time
Press 2sec.
to set time
Flashing
Priority Burner on
Press the set time button.
The clock display disappears when pushing again.
• The clock display will disappear if hot water is used or the temperature of the hot water is changed during
the clock display.
• If the Time set button is pushed when the hot water is being used or high temperature (60°C and 75°C) is
set, the clock is displayed for 10 seconds and will return to the original screen display after that.
• In the event of a power cut or after disconnecting the power supply, when the power is restored, the clock
on the display screen shows "0:00", so the clock needs to be re-set.
14
Operating Instructions
Bath Fill
Temp.
ON/OFF
Volume
Set Time Bath Fill
setting
2
The time changes in 1-minute increments
with each press on the button, and
then in 10-minute increments if the
button is kept pressed down.
Bath Fill
Temp.
Display the clock
2
The clock function is only Main controller.
1, 3
Adjust the clock
Increase
Decrease
Flashing
Bath Fill
Priority Burner on
Temp.
(Eg.: AM 10:15)
Set Time Set Time
Press 2sec.
to set time
Clock setting and the clock can be dis-
played regardless of "ON or OFF" of
the operation button.
(The illustration is in a state of "OFF".)
3
Press the Set
Time Button
It changes to lighting from
flashing and the clock begins
to work.
Flashing
Priority
Set Time Set Time
Press 2sec.
to set time
Bath Fill
Burner on
Temp.