Basic Playback; Listening To The Radio - Pioneer htp-072 Quick Start Manual

 Basic playback
Here are the basic instructions for playing a source (such as a Blu-ray Disc) with your home theater system.
• The following buttons are not used with this receiver:
– Acous.EQ, SB CH
RECEIVER
1
SLEEP SOURCE CONTROL
7 RECEIVER
INPUT SELECT
INPUT
BD DVD CD
TUNER iPod/USB SAT/CBL
3
GAME TV SIGNAL SEL
VOL
Acous.EQ S.RETRIEVER PHASE
4 AUTO/ ALC/
DIRECT STEREO STANDARD ADV SURR
ECO
AUDIO
TOOLS
PARAMETER VOLUME
MENU
TOP
MENU
A
ENTER
HOME
MENU
PTY BAND
iPod CTRL
RETURN
B MUTE
BASS TRE
A
1 2 3
DISP
SB CH CH SELECT
4 5 6
CH
MIDNIGHT SPEAKERS LEV
7 8 9
CH
DIMMER
A
LEV
0
CLR ENTER
+
10
RECEIVER
Canceling the Auto Power Down
(European and U.K. models)
When this receiver is not used over a period of
several hours, it will power down automatically. The
automatic power-off timer is set to six hours under
factory settings, and the timing can be changed or
the power-off function switched off altogether.

"The Auto Power Down menu"
1
Switch on your system components and receiver.
Start by switching on the playback component (for example a Blu-ray Disc player), your TV, then the receiver (press
 RECEIVER).
2
Switch the TV input to the input that connects this receiver.
For example, if you connected this receiver to the VIDEO jacks on your TV, make sure that the VIDEO input is now
TV
B
selected.
3
Press input function buttons to select the input function you want to play.
• The input of the receiver will switch over, and you will be able to operate other components using the remote
control.
• The input source can also be selected by using INPUT SELECT
the front panel INPUT SELECTOR dial. In this case, the remote control won't switch operational modes.
CH
• Press SIGNAL SEL to select the audio input signal corresponding to the source component (HDMI, digital or
analog).
4
Press AUTO/DIRECT to select 'AUTO SURROUND' and start playback of the source.
If you're playing a Dolby Digital or DTS surround sound Blu-ray/DVD disc, with a digital audio connection, you
6
should hear surround sound. If you're playing a stereo source or if the connection is an analog audio connection,
you will only hear sound from the front left/right speakers in the default listening mode.
A
Listening in Standard surround sound
This receiver provide basic surround sound for stereo and multichannel sources.
 While listening to a source, press ALC/STANDARD repeatedly to select a listening mode. 
Listening in Advanced surround sound
5
The Advanced surround effects can be used for a variety of additional surround sound effects.
 While listening to a source, press ADV SURR repeatedly to select a listening mode. 
5
Use VOLUME +/– to adjust the volume level.
• Sound can be switched off by pressing MUTE button.
6
Enjoy a variety of sounds.
 Press S.RETRIEVER to switch the Sound Retriever feature ON or OFF. 
• When audio data is removed during the compression process, sound quality often suffers from an uneven
A
sound image. The Sound Retriever feature employs new DSP technology that helps bring CD quality sound
back to compressed 2-channel audio by restoring sound pressure and smoothing jagged artifacts left over after
compression.
Other remote control functions
• The input of the receiver will switch over, and you will be able to operate other components using the remote
control. To operate the receiver, first press
 Use the "A" buttons to adjust the settings of this receiver and operate other devices. 
 Use the "B" buttons to operate TV. Operations are still possible even after pressing the 
button.

Listening to the radio

1
Press TUNER to select the tuner.
If necessary, press BAND to change the band (FM or AM).
2
TUNE 
Press
• Press and hold TUNE  for about a second. The receiver will start searching for the next station.
If you're listening to an FM station but the reception is weak, press BAND to select FM MONO and set the receiver
to the mono reception mode.
Saving station presets
If you often listen to a particular radio station, it's convenient to have the receiver store the frequency for easy recall
whenever you want to listen to that station.
1
Press TOOLS while receiving a signal from the station you want to store.
The display shows PRESET, then a blinking MEM and station preset.
2
Press PRESET  (or number buttons) to select the station preset you want, then press ENTER.
The preset number stop blinking and the receiver stores the station.
Listening to station presets
You will need to have some presets stored to do this.
 Press PRESET  (or number buttons) to select the station preset you want. 
( ), then press the appropriate button to operate.
RECEIVER 7
to tune to a station.
buttons on the remote control, or by using
RECEIVER
© 2013 PIONEER CORPORATION.
All rights reserved.
5
En