Oce im5530 Operator's Manual page 234

3.Changing Data of User Groups and Templates (Cont.)
5
Select the button of template to be changed, and then press the
[EDIT] button.
• If the desired template is not displayed on the menu, press the [Prev] or [Next] button to switch the menu.
6
Key in the password (5 digits) for the selected template, and then
press the [ENTER] button.
7
• If no password was set when the template was registered, skip to step 7.
7
Press the [NAME1] button and the [NAME2] button, and then enter the
new name of the template.
• When the [NAME 1] or [NAME 2] button is pressed, the letter entry menu (
acters can be entered.
• The following symbols cannot be used for [NAME 1] and [NAME 2].
["], [=], [|], [*], [<], [>], [?], [+], [[], []], [;], [:], [/], [\], [,], [.]
230
7.TEMPLATE
P.28) is displayed. Up to 11 char-