Using The Tuner; Listening To The Radio; Improving Fm Stereo Sound; Saving Station Presets - Pioneer HTP-710 Operating Instructions Manual

06

Using the tuner

Chapter 6
Using the tuner

Listening to the radio

The following steps show you how to tune in to
FM broadcasts using the automatic (search)
and manual (step) tuning functions. Once you
are tuned to a station you can memorize the
frequency for recall later—see Saving station
presets below for more on how to do this.
DIMMER SIGNAL SEL
BD MENU
1 Press TUNER to select the tuner.
2 Tune to a station.
There are three ways to do this:
Automatic tuning
To search for stations in the currently
selected band, press and hold TUNE /
(remote control or front panel) for about a
second. The system will start searching for
the next station, stopping when it has
found one. Repeat to search for other
stations.
Manual tuning
To change the frequency one step at a
time, press TUNE /.
High speed tuning
Press and hold TUNE / for high speed
tuning. Release the button at the frequency
you want.
Note
1 If the system is left disconnected from the AC power outlet for over a month, the station memories will be lost and will
have to be reprogrammed.
60
En
CH
TUNER EDIT
AUDIO
PARAMETER TOOLS
TOP
MENU
ENTER
VOL
HOME
MENU
SETUP
iPod CTRL
PTY SEARCH

Improving FM stereo sound

If the TUNE or ST indicators don't light when
tuning to an FM station because the signal is
weak, press the ST/MONO button to select FM
MONO and set the system to the mono
reception mode. This should improve the
sound quality and allow you to enjoy the
broadcast.
MASTER
VOLUME
MENU

Saving station presets

If you often listen to a particular radio station,
it's convenient to have the system store the
frequency for easy recall whenever you want to
RETURN
listen to that station. This saves the effort of
ST/MONO
manually tuning in each time. This unit can
memorize up to 30 stations.
SYSTEM
INPUT SELECT
SYSTEM
INPUT
DIMMER SIGNAL SEL
1 Tune to a station you want to memorize.
See Listening to the radio above for more on
this.
2 Press TUNER EDIT.
The display shows PRESET, then a blinking
MEM and station preset.
1
AUDIO
PARAMETER
TOP
SOURCE MENU
TV CONTROL
HOME
MENU
SETUP
iPod CTRL
PTY SEARCH
CH
BASS
VOL
HDD
BD MENU
MASTER
TUNER EDIT
TOOLS VOLUME
MENU
ENTER
RETURN
ST/MONO
DTV/TV
MUTE
TRE
DVD VCR
DISPLAY