Pioneer HTP-710 Operating Instructions Manual page 48

03 Controls and displays
9 Listening mode buttons
AUTO/DIRECT
Switches between Auto surround mode
(Auto playback on page 63) and Stream
Direct playback. Stream Direct playback
bypasses the tone controls for the most
accurate reproduction of a source
(page 65).
STEREO/A.L.C.
Switches between stereo playback, Auto
level control stereo mode (page 64) and
Front Stage Surround Advance modes
(page 65).
STANDARD
Press for Standard decoding and to switch
between 2 Pro Logic II options (page 63).
ADV SURR
Switches between the various surround
modes (page 64).
10 System Setup and Component control
buttons
The following button controls can be accessed
after you have selected the corresponding
MULTI CONTROL button (BD, TV, etc.).
Press
AUDIO PARAMETER
Use to access the Audio options (page 65).
SETUP
Press to access the System Setup menu
(page 72).
RETURN
Confirm and exit the current menu screen.
Press BD or DVR first to access:
TOP MENU
Displays the disc 'top' menu of a BD/DVD.
HOME MENU
Displays the HOME MENU screen.
RETURN
Confirm and exit the current menu screen.
48
En
first to access:
MENU
Displays the TOOLS menu screen of Blu-ray
Disc player.
Press TUNER first to access:
TUNER EDIT
Memorizes/names stations for recall
(page 60 and 61).
ST/MONO
Switches between auto stereo mode and
mono reception mode
PTY SEARCH
Use to search for RDS program types
(page 62).
Press iPod USB first to access:
iPod CTRL
Switches between the iPod controls and
the system controls (page 57).
11  (TUNE /, PRESET /),
ENTER
Use the arrow buttons when setting up your
surround sound system (page 72). Also used to
control BD/DVD menus/options.
Use the TUNE / buttons can be used to
find radio frequencies (page 60) and the
PRESET / buttons can be used to select
preset radio stations (page 61).
12 MASTER VOLUME +/–
Use to set the listening volume.
13 Component control buttons

The main buttons ( ,
control a component after you have selected it
using the input source buttons.
The controls above these buttons can be
accessed after you have selected the
corresponding input source button (for
example BD, DVR or TV). These buttons also
function as described below.
(page 60).

, etc.) are used to