Remote Control - Pioneer HTP-710 Operating Instructions Manual

Controls and displays

Remote control

SYSTEM
1
2
SYSTEM
4
INPUT
6
DIMMER SIGNAL SEL
7
9
10
ENTER
11
13
15
SURROUND SYSTEM
 SYSTEM
1
Switches the system between standby and on.
2 INPUT SELECT
Use to select the input source.
SOURCE
3
TV CONTROL
5
CH
VOL
BD MENU
8
12
14
MUTE
DISPLAY
16
CH
CH
17
ENTER
SOURCE
3
Press to turn on/off other components
connected to the system (see page 77 for more
on this).
4
Switches the remote to control the system
(used to select the white commands above the
number buttons (S.RETRIEVER, etc)). Also use
this button to set up surround sound (page 72)
or Audio parameters (page 65).
5 TV CONTROL buttons
These buttons are dedicated to control the TV
assigned to the TV button. Thus if you only
have one TV to hook up to this system assign it
to the TV button (see page 76 for more on this).

Use to turn on/off the power of the TV.
INPUT
Use to select the TV input signal.
CH +/–
Use to select channels.
VOL +/–
Use to adjust the volume on your TV.
6 MULTI CONTROL buttons
Press to select control of other components (see
Controlling the rest of your system on page 75).
7 DIMMER
Dims or brightens the display. The brightness
can be controlled in four steps.
8 SIGNAL SEL
Use to select an input signal (page 54).
Press BD first to access:
BD MENU
Displays the disc menu of Blu-ray Discs.
03
47
En