Speaker Distance - Pioneer HTP-710 Operating Instructions Manual

08 The System Setup menu
1 Select 'Channel Level' from the Manual SP
Setup menu.
2.Manual SP Setup
a.Speaker Setting
b.Channel Level
c.Speaker Distance
2 Select a setup option.
• Manual – Move the test tone manually
from speaker to speaker and adjust
individual channel levels.
• Auto – Adjust channel levels as the test
tone moves from speaker to speaker
automatically.
3 Confirm your selected setup option.
The test tones will start after you press ENTER.
After the volume increases to the reference
level, test tones will be output.
2b.Channel Level
Test Tone
Loud test tones
4 Adjust the level of each channel using
/.
If you selected Manual, use / to switch
speakers. The Auto setup will output test tones
in the order shown on-screen:
2b.Channel Level
Front L
Center
Front R
Surround R
Surr. Back R
Surr. Back L
Surround L
Subwoofer
Adjust the level of each speaker as the test tone
1
is emitted.
Note
1 • If you are using a Sound Pressure Level (SPL) meter, take the readings from your main listening position and adjust
the level of each speaker to 75 dB SPL (C-weighting/slow reading).
• The subwoofer test tone is output at low volumes. You may need to adjust the level after testing with an actual
soundtrack.
74
En
2b.Channel Level
Test Tone Manual
ENTER:NextReturn
Return
[ Manual ]
Please Wait . . .20
Caution
will be output.

Return
0dB
[ 0dB]
[ 0dB]
[ 0dB]
[ ––– ]
[ ––– ]
[ 0dB]
[ 0dB]
Return
5 When you're finished, press RETURN.
You return to the Manual SP Setup menu.
Tip
• You can change the channel levels at any
time by press
SELECT and +/– on the remote control. You
can also press CH SELECT and use / to
select the channel, and then use / to
adjust the channel levels.

Speaker Distance

For good sound depth and separation from
your system, you need to specify the distance
of your speakers from the listening position.
The system can then add the proper delay
needed for effective surround sound.
1 Select 'Speaker Distance' from the
Manual SP Setup menu.
2.Manual SP Setup
a.Speaker Setting
b.Channel Level
c.Speaker Distance
Return
2 Adjust the distance of each speaker using
/.
You can adjust the distance of each speaker in
0.1 m increments.
3 When you're finished, press RETURN.
You return to the Manual SP Setup menu.
, then press CH
2c.Speaker Distance
Front L 3.0 m
[ 3.0 m ]
Center
Front R [ 3.0 m ]
Surround R [ 3.0 m ]
[ –––– ]
Surr. Back R
Surr. Back L [ –––– ]
[ 3.0 m ]
Surround L
Subwoofer [ 3.0 m ]
Return