Disarming The System - NAPCO XP-400 Using Instruction

Emergency Conditions
Auxiliary
f
Emergency
f
Enabled?
Yes
Police
G
Emergency
G
Enabled?
Yes
Ambush
Alarm
Enabled?
Yes
8
Emergency Buttons
The two sets of emergency buttons, if programmed, are always active whether the system is armed
or disarmed. Discuss these buttons with your installer. The emergency signal will only be activated
when the two respective buttons are pressed at the same time.
Auxiliary Alarm: Simultaneously press
gency, if so programmed.
(The nature of this emergency alarm is to be determined by the installer)
Police Emergency: Simultaneously press
alert the central station of a fire emergency, if so programmed.
Ambush Alarm
In the event that you are forced by an intruder to disarm your system, the ambush alarm can be acti-
vated. Disarming the system with the Ambush Code will cause the system to disarm and simultane-
ously send a silent ambush alarm signal to Central Station. If your system has the Ambush feature
enabled, the code assigned as the User 4 code will function as your Ambush Code.
F G
F G
+ to alert the central station of an auxiliary emer-
f F
+
G G
to sound a police emergency alarm, and to