Table of Contents
Advertisement
Installing and Removing the Blade Guard
Blade Guards are "ambidextrous" – that is, they can be installed on either side of
the saw.
Installing the Blade Guard
1. Slide the Blade Guard Mounting Clip onto the Guard Mounting Tab on the
frame.
2. Connect the water delivery hose to the Blade Guard.
Ensure that the water pipes are pointed toward the water distribution
grooves in the Blade Collars.
3. Make sure the front-hinged section of the Blade Guard is fully closed before
use.
Blade Guard
hinged front
Mounting Clip
25
Fig. 7 — The Blade Guard installed
Top Handle
Water
Distribution
Manifold
Rear Handle
Blade Guard
rear section
Water
Delivery
Hose
Advertisement
Table of Contents
