MULTIQUIP StreetPro SP2 Series Operation And Parts Manual
  1. Manuals
  2. Brands
  3. MULTIQUIP Manuals
  4. Saw
  5. Diamond Back SP2 STREET-PRO
  6. Operation and parts manual

MULTIQUIP StreetPro SP2 Series Operation And Parts Manual

Self-propelled professional pavement saw
Hide thumbs Also See for StreetPro SP2 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
OPERATION AND PARTS MANUAL
SP2 StreetPro SERIES
MODEL SP2S13H20A
SELF-PROPELLED
PROFESSIONAL PAVEMENT SAW
(HONDA GX390K1QWT2 GASOLINE ENGINE)
Revision #1 (05/17/10)
THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
P/N 38263

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the StreetPro SP2 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for MULTIQUIP StreetPro SP2 Series

Summary of Contents for MULTIQUIP StreetPro SP2 Series

  • Page 1 OPERATION AND PARTS MANUAL SP2 StreetPro SERIES MODEL SP2S13H20A SELF-PROPELLED PROFESSIONAL PAVEMENT SAW (HONDA GX390K1QWT2 GASOLINE ENGINE) Revision #1 (05/17/10) THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES. P/N 38263...
  • Page 2 We sell worldwide for the brands: Genie, Terex, JLG, MultiQuip, Mikasa, Essick, Whiteman, Mayco, Toro Stone, Diamond Products, Generac Magnum, Airman, Haulotte, Barreto,...

  • Page 3: Proposition 65 Warning

    PROPOSITION 65 WARNING Engine exhaust some its constituents, and some dust created by power sanding, sawing, grinding, drillingandotherconstructionactivities contains chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. Some examples of these chemicals are: Leadfromlead-basedpaints.

  • Page 4: Silicosis/Respiratory Warnings

    SILICOSIS/RESPIRATORY WARNINGS WARNING WARNING SILICOSIS WARNING RESPIRATORY HAZARDS Grinding/cutting/drilling of masonry, concrete, metal and Grinding/cutting/drilling of masonry, concrete, metal and other materials with silica in their composition may give other materials can generate dust, mists and fumes off dust or mists containing crystalline silica. Silica is a containing chemicals known to cause serious or fatal basic component of sand, quartz, brick clay, granite and injury or illness, such as respiratory disease, cancer,...

  • Page 5: Table Of Contents

    TABLE OF CONTENTS Honda Gx390k1qwt2 Engine SP2S13H20A StreetPro Saw Proposition 65 Warning ........... 2 Air Cleaner Assembly........74-75 Silicosis/Respiratory Warnings ........ 3 Camshaft Assembly ......... 76-77 Table Of Contents ........... 4 Carburetor Assembly ........78-79 Parts Ordering Procedures ........5 Control Assembly ..........

  • Page 6: Specifications

    SPECIFICATIONS Table 1. Specifications Model SP2S13H20A Blade Capacity in. (mm) 20 in. (508 mm) Cutting Depth in. (mm) 7.5 in. (191 mm) Front Wheels in. (mm) 5 in. Dia x 2 in. Wide (127 mm x 51 mm) Rear Wheels in. (mm) 8 in.

  • Page 7: Dimensions

    DIMENSIONS Figure 1. SP2S13H20A Dimensions . N I l l u f & r e t e s i . n i u f ( y l l e s i & r e t y l l e s i l l u f s i a &...

  • Page 8: Safety Message Alert Symbols

    SAFETY MESSAGE ALERT SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! HAZARD SYMBOLS Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the Safety Messages and Operating Instructions could result in Lethal Exhaust Gases injury to yourself and others.
  • Page 9 SAFETY MESSAGE ALERT SYMBOLS Accidental Starting Respiratory Hazard ALWAYS place the ON/OFF switch in the OFF position, remove key and/or disconnect the ALWAYS wear approved respiratory spark plug lead before servicing the engine protection. or equipment. Ground the lead to prevent sparks that could ignite a fire.

  • Page 10: Rules For Safe Operation

         NEVER use accessories or attachments, which are not from fuel vapors , or if fuel is spilled on recommended by or Multiquip for this equipment. Damage a hot! engine. to the equipment and/or injury to user may result.
  • Page 11 RULES FOR SAFE OPERATION Diamond Blade Safety General Safety      Use appropriate steel centered diamond blades      ALWAYS read, understand, and follow procedures in manufactured for use on saws. Operator's Manual before attempting to operate equipment. ...
  • Page 12 RULES FOR SAFE OPERATION Maintenance Safety Emergencies      NEVER lubricate components or attempt service on a      ALWAYS know the location of running machine. the nearest fire extinguisher .      ALWAYS allow the machine a proper amount of time to cool before servicing.

  • Page 13: Major Components

    MAJOR COMPONENTS Figure 3. SP2S13H20A Saw Major Components Water ON/OFF Valve – ON position opens valve and Figure 3 displays the location of the various operational control permits water to flow from source through saw water hose. features of the SP2S13H20A pavement saw. Features are OFF position closes valve and halts the flow of water.
  • Page 14 13HP HON ONDA ENGINE COMPONENTS Figure 4. Engine Controls and Components (Honda GX390K1QWT2) INITIAL SERVICING The engine (Figure 4) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturers Engine manual for instructions & details of operation and servicing. Fuel Filler Cap –...

  • Page 15: General Information

    GENERAL INFORMATION Familiarization Water System The SP2S13H20A saw is designed for wet or dry cutting of All saws provide a water direction system to provide cooling concrete or asphalt utilizing diamond blades. They have been water to the diamond blade. This system consists of: a standard engineered for general, industrial and high production flat cutting "garden hose"...

  • Page 16: Inspection

    INSPECTION 3. Insert and remove the dipstick without screwing it into the filler Before Starting neck. Check the oil level shown on the dipstick. 1. Read safety instructions at the beginning of manual. 4. If the oil level is low (Figures 6 and 7), fill to the edge of the 2.
  • Page 17 INSPECTION Battery - The 12-volt DC battery (Figure 10) is shipped dry, Hydrostatic Transmission and will require a proper electrolyte level for operation. An EATON® Model 7 hydrostatic transmission (Figure 8) provides the power for the saw's propulsion system. The transmission drives a sprocket that directly connects the spline drive to the rear wheels.

  • Page 18: Inspection -Blade

    INSPECTION -BLADE Directional Arrow – Check to ensure that the blade is WARNING WARNING WARNING WARNING WARNING oriented properly on the blade shaft for sawing. Reference the directional arrow in the blade and place it so the direction Failure to thoroughly inspect the diamond blade (Figure 11) of rotation “downcuts”...

  • Page 19: Inspection - Blade Placement

    INSPECTION - BLADE PLACEMENT Blade Nut – Remove the blade nut (4). For reassembly, The following steps should be NOTE DO NOT over tighten the blade nut against the outer flange. accomplished before placing the Tighten blade nut approximately 45-50 ft-lbs/62-69 N/m. diamond blade on the blade shaft.

  • Page 20: Inspection -Guards, Covers & Belts

    INSPECTION -GUARDS, COVERS & BELTS Guards and Covers Check V-Belts and Covers WARNING WARNING CAUTI CAUTI WARNING WARNING WARNING CAUTI CAUTI CAUTION NEVER operate the saw without blade NEVER attempt to check the V-belt with the guards and covers (Figures 13, 14 and 15) engine running because severe injury can in place.

  • Page 21: Inspection - Belts & Water Tank

    INSPECTION - BELTS & WATER TANK 3. Check V-belt tension (Figure 17) by using a tensionmeter Water Tank (6.0 - 9.0 lbs.) against the inside belt at a mid point between The SP2S13H20A Saw is equipped with a removable 5-gallon the two pulleys, or by deflecting the center belt at a mid point on-board water tank fitted in the top of the console which can be 3/8”...

  • Page 22: Manual Start-Up

    MANUAL START-UP The CLOSED position of the choke CAUTI CAUTI CAUTION CAUTI CAUTI lever enriches the fuel mixture for NOTE starting a COLD engine. The OPEN DO NOT attempt to operate the saw until the Safety, General position provides the correct fuel Information and Inspection sections have been read and mixture for normal operation after understood.
  • Page 23 MANUAL START-UP 7. Place the throttle lever (Figure 23) halfway between FAST 9. If the engine has started, slowly return the choke lever and SLOW for starting. All sawing is done at full throttle. The (Figure 22) to the CLOSED position. If the engine has not engine governor speed is factory set to ensure optimum started repeat steps 1 through 8.

  • Page 24: Shut-Down Procedures

    SHUT-DOWN PROCEDURES Emergency Stop Procedure Stopping the Engine (13 HP Honda Engine) 1. Turn the console engine ON/OFF switch (Figure 31) to the WARNING WARNING WARNING WARNING WARNING OFF position. NEVER stop the engine while the blade is in the cut, except for extreme emergencies.

  • Page 25: Operation

    OPERATION Adjusting the Blade Height CAUTI CAUTI CAUTION CAUTI CAUTI The SP2S13H20A saw uses a manual raise/lower crank handle located on the console with clockwise rotation providing NEVER stop the engine while cutting at high speeds, except for lowering action, and counter-clockwise rotation providing extreme emergencies.
  • Page 26 OPERATION 3. Move the travel lever towards the FORWARD position to CAUTI CAUTION CAUTI CAUTI CAUTI increase forward travel speed during cutting (Figure 40). Placing the travel lever fully forward will move the saw at DO NOT force the blade into the cut any faster than its maximum speed.
  • Page 27 OPERATION Cutting WARNING WARNING WARNING WARNING WARNING The operator MUST wear the appropriate protective equipment and clothing while engaged in sawing. Failure to do so can result in SERIOUS INJURY. Figure 44. Water System ON/OFF Valve DANGER DANGER DANGER DANGER DANGER 5.
  • Page 28 OPERATION Finishing A Cut Diamond Blades 1. Raise the blade out of the cut by cranking the Raise/Lower Diamond blade sawing consists of cutting WET (using water to cool the blade) or DRY (using the circulating air to cool the blade). handle COUNTER-CLOCKWISE (Figure 37).

  • Page 29: Maintenance

    MAINTENANCE Maintenance Engine air filter: Clean air filter 2 to 3 times daily when DRY cutting. See WARNING WARNING WARNING WARNING WARNING Engine Owner’s Manual for detailed information. Engine tank & strainer: General maintenance practices are crucial to the Clean every year/or 300 hours. performance and longevity of your saw.
  • Page 30 MAINTENANCE General Transmission Care Spline Gear Wheels: All SP2S13H20A model saws utilize spline gear wheel design Check every 25 hours and clean as necessary. If the spline coupled with an EATON Model 7 Hydrostatic Transmission that wheels DO NOT engage the rear wheels with sufficient provides forward/reverse propulsion.
  • Page 31 MAINTENANCE Adjust V-Belt Alignment/Replacement Pulleys Drive V-Belt Check The V-belts and their respective pulleys have been professionally The V-Belts of the SP2S13H20A saw have been factory set aligned at the factory. If there is a requirement to remove/replace utilizing precision standards. Operating the saw with less than or adjust the pulleys, proceed with the following instructions.
  • Page 32 MAINTENANCE Blade Shaft Bearing Replacement Reference Figure 50 & Figure 51 for steps 4-9 4. Remove Blade Hex Nuts (Figures 50 & 51, item 1) and The SP2S13H20A saw is supported by “tapped base lock collar Outside/Inside Blade Flanges (Figures 50, item 2 & 3) (w/set screw)"...
  • Page 33 MAINTENANCE Battery Maintenance  Check the battery regularly and make sure that each electrolyte level is to the bottom of the vent well Mishandling of the battery shortens the service life of the battery (Figure 43). If necessary add only distilled water in a and adds to maintenance cost.

  • Page 34: 13Hp Engine Wiring Diagram (Recoil Start)

    13HP ENGINE WIRING DIAGRAM (RECOIL START) Figure 52. 13HP Honda Engine Wiring Diagram SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10) — PAGE 37...

  • Page 35: Troubleshooting (Engine)

    TROUBLESHOOTING (ENGINE) Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, please take a remedial action following the diagnosis based on the Engine Troubleshooting (Table 7) information shown below and on the proceeding page.
  • Page 36 TROUBLESHOOTING (ENGINE) r i A e l c a e l a l p r i a e l c l f k t a o j d a t s u , t n - e r d l i n i l o t e .

  • Page 37: Troubleshooting (Blade)

    TROUBLESHOOTING (BLADE) Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, please take a remedial action following the diagnosis based on the Blade Troubleshooting (Table 8) information shown below and on the proceeding page.

  • Page 38: Explanation Of Code In Remarks Column

    A blank entry generally indicates that the item is not sold assembly/kit that can be purchased, or is not available separately or is not sold by Multiquip. Other entries will for sale through Multiquip. be clarified in the “Remarks” Column.

  • Page 39: Suggested Spare Parts

    SUGGESTED SPARE PARTS SP2S13H20A SAW (13HP SELF-PROPELLED) 1 to 3 Units Qty..P/N ....Description 3 ..16052 ....V-BELTS, DRIVE 1 ..07055-051 ..V-BELTS, TRANSMISSION 1 ..29013-001 ..WRENCH, BOX END 1-1/2 IN. 1 ..60087 ....ROPE, FRONT POINTER 1/4 IN. 2 ..
  • Page 40 NAME PLATE AND DECALS NAME PLATE AND DECALS. PAGE 44 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10)
  • Page 41 NAME PLATE AND DECALS NAME PLATE AND DECALS PART NO PART NAME QTY. REMARKS 38213 DECAL, MULTIQUIP 23596-001 DECAL, RECOMMENDED MAINTENANCE 38224 DECAL, SP2S13H20A NAMEPLATE ..............1 ..CONTACT DISCOUNT-EQUIPMENT. 28853-001 DECAL, FORWARD/REVERSE LEVER 20525 DECAL, PROP. 65 22122-001 DECAL, SERIOUS INJURY WARNING...
  • Page 42 UNDER CARRIAGE ASSY. UNDER CARRIAGE ASSY. PAGE 46 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10)
  • Page 43 UNDER CARRIAGE ASSY. UNDERCARRIAGE ASSY. PART NO PART NAME QTY. REMARKS 28777-352 FRAME ASSY. 16”/18”/20” 28781-002 AXLE, REAR & FRONT 28782-351 FRAME, UNDERCARRIAGEE ASSY. 28086-001 WHEEL, 8 X 2 .75 ROLLER BEARING REAR 28085-001 WHEEL, 5 X 2 .75 ROLLER BEARING FRONT 8151 WASHER, FLAT SAE 3/4 10065-090...
  • Page 44 BLADE SHAFT ASSY. BLADE SHAFT ASSY. LUBRICATION POINT LUBRICATION POINT NOTES: ENGINE PULLEY, SEE ENGINE ASSY. PAGE 48 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10)
  • Page 45 BLADE SHAFT ASSY. BLADE SHAFT ASSY. PART NO PART NAME QTY. REMARKS 28807-002 SPINDLE, BLADE 28081-001 BEARING, PILLOW BLOCK 1.25ID AS206-20 28811-002 FLANGE, BLADE INSIDE 4.0OD X 1.0ID 26928-002 FLANGE, BLADE OUTSIDE 1.0ID X5.0OD X 56 26928-004 FLANGE, BLADE OUTSIDE 1.0ID X4.0OD X 56 0125 KEY, WOODRUFF #15 6059 B...
  • Page 46 LIFTING BALE ASSY. LIFTING BALE ASSY. PAGE 50 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10)
  • Page 47 LIFTING BALE ASSY. LIFTING BALE ASSY. PART NO PART NAME QTY. REMARKS 28890-351 13HP, LIFT BALE ASSY. 28890-352 20HP, LIFT BAIL ASSY. 28893-001 BRACE, 13HP BAIL 28893-002 BRACE, 20HP BAIL 0205 SCREW, HHC 3/8-16 X 1.0 10133 NUT, NYLOC 3/8-16 10136 WASHER, FLAT SAE 3/8 5283...
  • Page 48 CONSOLE ASSY. CONSOLE ASSY. PAGE 52 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10)
  • Page 49 CONSOLE ASSY. CONSOLE ASSY. PART NO PART NAME QTY. REMARKS 28796-351 HANDLE ASSY. 15081 GRIP, 1” ID 4196 SCREW, HHC 3/8-16 X .75 0166 A WASHER, LOCK 3/8 MED. 10136 WASHER, FLAT SAE 3/8 28091-401 SHIFT CONTROL ASSY. 28834-001 COVER, REAR 0131 A SCREW, HHC 1/4-20 X 3/4 1002 4...
  • Page 50 13HP HONDA ENGINE MOUNT ASSY. 13HP HONDA ENGINE MOUNT ASSY. PAGE 54 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10)
  • Page 51 We sell worldwide for the brands: Genie, Terex, JLG, MultiQuip, Mikasa, Essick, Whiteman, Mayco, Toro Stone, Diamond Products, Generac Magnum, Airman, Haulotte, Barreto,...
  • Page 52 13HP HONDA ENGINE MOUNT ASSY. 13HP HONDA ENGINE MOUNT ASSY. PART NO PART NAME QTY. REMARKS 15868-032 SCREW, SQHS 1/2-13 X 4, CUP PLAIN 0447 WASHER, FLAT SAE 1/2 968011 NUT, HEX FINISH 1/2-13 10176 NUT, NYLOC 1/2-13 3214 SCREW, HHC 1/2-13 X 1 1/4 9154 SCREW, HHC 3/8-16 X 1 3/4 10136...
  • Page 53 ENGINE ASSY. ENGINE ASSY. NOTES: SEE BLADE SHAFT ASSY. SEE HYDROSTATIC DRIVE ASSY. PAGE 56 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10)
  • Page 54 ENGINE ASSY. ENGINE ASSY. PART NO PART NAME QTY. REMARKS 15103 ENGINE, HONDA 13HP, GX390K1QWT2 23703-003 PULLEY, ENGINE 13 HP, 4F3V26X1 6059 B KEY 1/4" SQ. X 2, 1018 STOCK SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10) — PAGE 57...
  • Page 55 POINTERS AND COVERS ASSY. POINTERS AND COVERS ASSY. PAGE 58 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10)
  • Page 56 POINTERS AND COVERS ASSY. POINTER AND COVERS ASSY. PART NO PART NAME QTY. REMARKS 28646-351 BLADE GUIDE WELDMENT 28649-001 SPANNER BUSHING CSI 28648-001 WHEEL, 3.00 X 1.25 .50 ID POLY CSI 28647-001 POINTER 1456 NUT, HEX FINISH 3/8-16 10133 NUT, NYLOC 3/8-16 15114 SLEEVE, SASH 60087...
  • Page 57 WATER SYSTEM ASSY. WATER SYSTEM ASSY. PAGE 60 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10)
  • Page 58 WATER SYSTEM ASSY. WATER SYSTEM ASSY. PART NO PART NAME QTY. REMARKS 12694-008 HOSE CLAMP, SPRING TYPE 7/8 O.D HOSE 23255-004 HOSE, WATER 1/2 X 37 23566-001 FITTING, PLASTIC 90 1/2MP X 1/2BARB 23259-001 VALVE, BALL 1/2 MPT BRASS NIBCO T585-70 23254-001 FITTING, NIPPLE 1/2MP X 2 GALV.
  • Page 59 BLADE GUARD ASSY. BLADE GUARD ASSY. PAGE 62 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10)
  • Page 60 BLADE GUARD ASSY. BLADE GUARD ASSY. PART NO PART NAME QTY. REMARKS 29406-754 BLADE GUARD W/A - RED 28729-002 GUARD, SPLASH BLADE 60021 HOSE, 3/8ID X 5/8OD BRAIDED PVC “PAC” 1.670 0131 A SCREW, HHC 1/4-20 X 3/4 10024 NUT, NYLOC 1/4-20 24642-001 Y-CONNECTOR 3/8 12694-006...
  • Page 61 MANUAL RAISE AND LOWER ASSY. (20 IN. ) MANUAL RAISE AND LOWER ASSY. (20 IN.) LUBRICATION POINT PAGE 64 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10)
  • Page 62 MANUAL RAISE AND LOWER ASSY. (20 IN. ) JACK SCREW ASSY. 20” BLADE PART NO PART NAME QTY. REMARKS 28793-352 JACKPOST ASSY. 2621 ZERK, GREASE STR. 1/4-28 28806-001 JACKSCREW 28083-001 BEARING, FLANGE 28809-001 SPACER, JACKSCREW 4568 PIN, ROLL 3/16 X 1 28877-751 SCREW COVER ASSY., RED 1579...
  • Page 63 BATTERY ASSY. BATTERY ASSY. PAGE 66 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10)
  • Page 64 BATTERY ASSY. BATTERY ASSY. PART NO PART NAME QTY. REMARKS 4671 BATTERY, WET GR.U1, GT-X GOLD LA 28096-001 BRACKET BATTERY 28095-401 BATTERY HOLD DOWN KIT 425-405 28093-001 CABLE, BATTERY POS 6GA X 42” RING TONGUE 1 28094-001 STRAP, GROUND 0131 A SCREW, HHC 1/4-20 X 3/4 0948 WASHER, FLAT SAE 1/4...
  • Page 65 TRANSMISSION ENGAGE LEVER ASSY. TRANSMISSION ENGAGE LEVER ASSY. PAGE 68 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10)
  • Page 66 TRANSMISSION ENGAGE LEVER ASSY. HYD. TRANSMISSION ENGAGE LEVER ASSY. PART NO PART NAME QTY. REMARKS 28825-351 LEVER ASSY. TRANS. ENGAGE 3360 GRIP, 1/4 X 1 BLACK 28822-351 MOUNT ASSY., LEVER RED 0655 SCREW, HHC 5/16-18 X 3/4 10136 WASHER, FLAT SAE 3/8 6014 B PIN, COTTER 3/32D X 1.0 08326-005...
  • Page 67 HYDROSTATIC TRANSMISSION ASSY. HYDROSTATIC TRANSMISSION NOTES: INCLUDED WITH ITEM 6, CONSOLE ASSY. PAGE 70 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10)
  • Page 68 HYDROSTATIC TRANSMISSION ASSY. HYDROSTATIC TRANSMISSION ASSY. PART NO PART NAME QTY. REMARKS 20559-001 SPRING, EXT. 3.38FL X 71OD X .105 1493 SCREW, HHC 3/8-18 X 3.25 28836-001 LINK, RETURN SPRING 10133 NUT, NYLOC 3/8-16 10136 WASHER, FLAT SAE 3/8 1023 SCREW, HHC 3/8-16 X 1 1/4 GR 5 15354 TRANSMISSION, HYD EATON...
  • Page 69 HYDROSTATIC DRIVE ASSY. HYDROSTATIC DRIVE ASSY. NOTES: USE LOCTITE P/N 60091 (BLUE) SEE ENGINE ASSY., REQUIRES A 4-GROOVE PULLEY, ITEM 2. PAGE 72 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10)
  • Page 70 HYDROSTATIC DRIVE ASSY. HYDROSTATIC DRIVE ASSY. PART NO PART NAME QTY. REMARKS 23227-001 SPROCKET, TRANSMISSION 12 TOOTH MACH 25039 SCREW, SHS 10-24 X 1/4 23231-503 CHAIN, ROLLER .375 PITCH X 21.75 10504-035 LINK, CHAIN 5283 NUT, NYLOC 5/16-18 28084-001 SPROCKET, 3548 X 3/4 0126 KEY, WOODRUFF #9 28832-001...

  • Page 71: Honda Gx390K1Qwt2 Engine

    HONDA GX390K1QWT2 ENGINE — AIR CLEANER ASSY. AIR CLEANER ASSY. PAGE 74 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10)
  • Page 72 HONDA GX390K1QWT2 ENGINE — AIR CLEANER ASSY. AIR CLEANER ASSY. PART NO. PART NAME QTY. REMARKS 16271ZE2000 GASKET, ELBOW 17210ZE3505 ELEMENT, AIR CLEANER ......1 ..INCLUDES ITEMS W/ 17218ZE3505 FILTER, OUTER 17219HA2405 SEAL, AIR CLEANER COVER 17230ZE3841 COVER, AIR CLEANER (CYCLONE) 17232891000 GROMMET, AIR CLEANER 17238ZE2310...
  • Page 73 HONDA GX390K1QWT2 ENGINE — CAMSHAFT ASSY. CAMSHAFT ASSY. PAGE 76 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10)

  • Page 74: Camshaft Assembly

    HONDA GX390K1QWT2 ENGINE — CAMSHAFT ASSY. CAMSHAFT ASSY. PART NO. PART NAME QTY. REMARKS 14100ZF6W01 CAMSHAFT ASSEMBLY ......1 ..INCLUDES ITEM W/ 14410ZE3013 ROD, PUSH 14431ZE2010 ARM, VALVE ROCKER 14441ZE2000 LIFTER, VALVE 14451ZE1013 PIVOT, ROCKER ARM 14568ZE1000 SPRING, WEIGHT RETURN 14711ZE3000 VALVE, INTAKE 14721ZE3000...
  • Page 75 HONDA GX390K1QWT2 ENGINE — CARBURETOR ASSY. CARBURETOR ASSY. PAGE 78 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10)
  • Page 76 HONDA GX390K1QWT2 ENGINE — CARBURETOR ASSY. CARBURETOR ASSY. PART NO. PART NAME QTY. REMARKS 16010ZE2812 GASKET SET 16011ZA0931 VALVE SET, FLOAT 16013ZA0931 FLOAT SET 16015ZE8005 CHAMBER SET, FLOAT ...... 1 ..... INCLUDES ITEMS W/ 16016ZH7W01 SCREW SET 16024ZE1811 SCREW SET, DRAIN ......1 ..... INCLUDES ITEM W/ # 16028ZE0005 SCREW SET B ........
  • Page 77 HONDA GX390K1QWT2 ENGINE — CONTROL ASSY. CONTROL ASSY. PAGE 80 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10)
  • Page 78 HONDA GX390K1QWT2 ENGINE — CONTROL ASSY. HONDA GX390K1QWT2 ENGINE — CONTROL ASSY. CONTROL ASSY. PART NO. PART NAME QTY. REMARKS 16551ZE3000 ARM, GOVERNOR 16555ZE3000 ROD, GOVERNOR 16561ZE3000 SPRING, GOVERNOR 16562ZE3000 SPRING, THROTTLE RETURN 16570ZE3W20 CONTROL ASSY. (REMOTE) ....1 ..INCLUDES ITEMS W/ 16571ZE3W00 LEVER, CONTROL 16574ZE1000...
  • Page 79 HONDA GX390K1QWT2 ENGINE — CRANKCASE ASSY. CRANKCASE COVER ASSY. PAGE 82 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10)
  • Page 80 HONDA GX390K1QWT2 ENGINE — CRANKCASE ASSY. CRANKCASE COVER ASSY. PART NO. PART NAME QTY. REMARKS 11300ZE3602 COVER ASSY., CRANKCASE (Q-TYPE) ..1 ....INCLUDES ITEMS W/ 11381ZE3801 GASKET, CASE COVER 15600ZG4003 CAP ASSY., OIL FILLER .........1 ....INCLUDES ITEM W/ # 15600735003 CAP ASSY., OIL FILLER .........1 ....
  • Page 81 HONDA GX390K1QWT2 ENGINE — CRANKSHAFT ASSY. CRANKSHAFT ASSY. PAGE 84 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10)
  • Page 82 HONDA GX390K1QWT2 ENGINE — CRANKSHAFT ASSY. CRANKSHAFT ASSY. PART NO. PART NAME QTY. REMARKS 13310ZF6W10 CRANKSHAFT (Q-TYPE) ......1 ..INCLUDES ITEM W/ 13351ZE3010 WEIGHT, BALANCER 90745ZE2600 KEY(6.3X6.3X43) 91001ZF6003 BEARING, RADIAL BALL (6207S) SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10) — PAGE 85...
  • Page 83 HONDA GX390K1QWT2 ENGINE — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. PAGE 86 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10)
  • Page 84 HONDA GX390K1QWT2 ENGINE — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. PART NO. PART NAME QTY. REMARKS 12000ZF6W13 CYLINDER ASSY. (ALERT) ....... 1 ..INCLUDES ITEMS W/ 15510ZE2043 SWITCH ASSY., OIL LEVEL 16541ZE3010 SHAFT, GOVERNOR ARM 90131896650 BOLT, DRAIN PLUG 90446KE1000 WASHER (8.2X17X0.8) 91201ZE3004 OIL SEAL (35X52X8)
  • Page 85 HONDA GX390K1QWT2 ENGINE — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. PAGE 88 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10)
  • Page 86 HONDA GX390K1QWT2 ENGINE — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. PART NO. PART NAME QTY. REMARKS 12200ZF6W01 CYLINDER HEAD ..........1 ....INCLUDES ITEMS W/ 12204ZE2306 GUIDE, VALVE (OS) (OPTIONAL) 12205ZE2305 GUIDE, EX. VALVE (OS) (OPTIONAL) 12216ZE2300 CLIP, VALVE GUIDE 12251ZF6W00 GASKET, CYLINDER HEAD 12310ZE3791 COVER, HEAD...
  • Page 87 HONDA GX390K1QWT2 ENGINE — FAN COVER ASSY. FAN COVER ASSY. PAGE 90 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10)
  • Page 88 HONDA GX390K1QWT2 ENGINE — FAN COVER ASSY. FAN COVER ASSY. PART NO. PART NAME QTY. REMARKS 16731ZE2003 CLIP, TUBE 19610ZE3010ZB COVER, FAN *NH1* (BLACK) 19631ZE3W00 SHROUD 36100ZH7003 SWITCH ASSY., ENGINE STOP 90013883000 BOLT, FLANGE (6X12) (CT200) SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10) — PAGE 91...
  • Page 89 HONDA GX390K1QWT2 ENGINE — FLYWHEEL ASSY. FLYWHEEL ASSY. PAGE 92 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10)
  • Page 90 HONDA GX390K1QWT2 ENGINE — FLYWHEEL ASSY. FLYWHEEL ASSY. PART NO. PART NAME QTY. REMARKS 19511ZE3000 FAN, COOLING 28450ZE3W11 PULLEY, STARTER (SCREEN GRID) 31100ZE3701 FLYWHEEL 90201ZE3V00 NUT, SPECIAL (16MM) (1) 90741ZE2000 KEY, SPECIAL WOODRUFF (25X18) SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10) — PAGE 93...
  • Page 91 HONDA GX390K1QWT2 ENGINE — FUEL TANK ASSY. FUEL TANK ASSY. PAGE 94 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10)
  • Page 92 HONDA GX390K1QWT2 ENGINE — FUEL TANK ASSY. FUEL TANK ASSY. PART NO. PART NAME QTY. REMARKS 16854ZH8000 RUBBER, SUPPORTER (107MM) 16955ZE1000 JOINT, FUEL TANK 17510ZE3010ZB TANK, FUEL *NH1* (BLACK) 17620ZH7023 CAP, FUEL FILLER ..........1 ..INCLUDES ITEM W/ 17631ZH7003 GASKET, FUEL FILLER CAP 91353671003 O-RING (13.5X1.5) (ARAI)
  • Page 93 HONDA GX390K1QWT2 ENGINE — IGNITION COIL ASSY. IGNITION COIL ASSY. PAGE 96 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10)
  • Page 94 HONDA GX390K1QWT2 ENGINE — IGNITION COIL ASSY. IGNITION COIL ASSY. PART NO. PART NAME QTY. REMARKS 30500ZF6W01 COIL ASSY., IGNITION 30700ZE1013 CAP ASSY., NOISE SUPPRESSOR 31512ZE2000 GROMMET, WIRE 36101ZE2701 WIRE, STOP SWITCH (430MM) 90015883000 BOLT, FLANGE (6X28) 90684ZA0601 CLIP, WIRE HARNESS SP2S13H20A SAW —...
  • Page 95 HONDA GX390K1QWT2 ENGINE — MUFFLER ASSY. MUFFLER (1) ASSY. PAGE 98 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10)
  • Page 96 HONDA GX390K1QWT2 ENGINE — MUFFLER ASSY. MUFFLER (1) ASSY. PART NO. PART NAME QTY. REMARKS 18310ZE2W61 MUFFLER 18320ZE2W61 PROTECTOR, MUFFLER 18330ZE2W00 PIPE, EX. 18331ZE3810 CAP, MUFFLER 18333ZF6W01 GASKET, EX. PIPE 18355ZE2W00 ARRESTER, SPARK (OPTIONAL) 18381ZE2W10 GASKET, MUFFLER (ARRESTER) (OPTIONAL) 18381ZE2800 GASKET, MUFFLER 90050ZE1000 SCREW, TAPPING (5X8)
  • Page 97 HONDA GX390K1QWT2 ENGINE — PISTON ASSY. PISTON ASSY. PAGE 100 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10)
  • Page 98 HONDA GX390K1QWT2 ENGINE — PISTON ASSY. PISTON ASSY. PART NO. PART NAME QTY. REMARKS 13010ZF6003 RING SET, PISTON (STD) 13011ZF6003 RING SET, PISTON (OS 0.25) (OPTIONAL) 13012ZF6003 RING SET, PISTON (OS 0.50) (OPTIONAL) 13012ZF6005 RING SET, PISTON (OS 0.50) (OPTIONAL) 13013ZF6003 RING SET, PISTON (0.75) (NIPPON) 13101ZF6W00...
  • Page 99 HONDA GX390K1QWT2 ENGINE — RECOIL STATER ASSY. RECOIL STARTER ASSY. PAGE 102 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10)
  • Page 100 HONDA GX390K1QWT2 ENGINE — RECOIL STATER ASSY. RECOIL STARTER ASSY. PART NO. PART NAME QTY. REMARKS 28400ZE3W01ZB STARTER ASSY., RECOIL *NH1* (BLACK) ....1 ..INCLUDES ITEMS W/ 28410ZE3W01ZB CASE, RECOIL STARTER *NH1* (BLACK) 28421ZE3W01 PULLEY, RECOIL STARTER 28422ZE2W01 RATCHET, STARTER 28441ZE2W01 SPRING, FRICTION 28442ZE2W01...
  • Page 101 HONDA GX390K1QWT2 ENGINE — LABELS ASSY. LABELS ASSY. PAGE 104 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10)
  • Page 102 HONDA GX390K1QWT2 ENGINE — LABELS ASSY. LABELS ASSY. PART NO. PART NAME QTY. REMARKS 87521ZF6W01 EMBLEM 87522ZH9000 LABEL, CAUTION 87528ZE2810 MARK, CHOKE (EXTERNAL) 87532ZH8810 MARK, OIL ALERT (E) 87534ZE1841 LABEL, AIR CLEANER CAUTION 87535ZE1840 MARK, AIR CLEANER SALES POINT SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10) — PAGE 105...
  • Page 103 We sell worldwide for the brands: Genie, Terex, JLG, MultiQuip, Mikasa, Essick, Whiteman, Mayco, Toro Stone, Diamond Products, Generac Magnum, Airman, Haulotte, Barreto,...

This manual is also suitable for:

Streetpro sp2s13h20a

Table of Contents