MULTIQUIP TP24X Operation And Parts Manual
  1. Manuals
  2. Brands
  3. MULTIQUIP Manuals
  4. Saw
  5. TP24X
  6. Operation and parts manual

MULTIQUIP TP24X Operation And Parts Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OPERATION AND PARTS MANUAL
MODEL TP24X
TILE SAW
(ELECTRIC MOTOR)
Revision #4 (09/12/19)
To find the latest revision of this
publication, visit our website at:
www.multiquip.com
THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TP24X and is the answer not in the manual?

Questions and answers

Related Manuals for MULTIQUIP TP24X

Summary of Contents for MULTIQUIP TP24X

  • Page 1 OPERATION AND PARTS MANUAL MODEL TP24X TILE SAW (ELECTRIC MOTOR) Revision #4 (09/12/19) To find the latest revision of this publication, visit our website at: www.multiquip.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.

  • Page 2: Proposition 65 Warning

    PROPOSITION 65 WARNING PAGE 2 — TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19)

  • Page 3: Silicosis/Respiratory Warnings

    NIOSH/MSHA for the materials being used. TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19) — PAGE 3...

  • Page 4: Table Of Contents

    Bearing Housing Assy........44-45 Switch Box Assy..........46-47 Tools And Accessories ........48-49 NOTICE Specifications and part numbers are subject to change without notice. PAGE 4 — TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19)
  • Page 5 NOTES TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19) — PAGE 5...

  • Page 6: Safety Information

    COULD result in DEATH or SERIOUS INJURY. CAUTION Indicates a hazardous situation which, if not avoided, COULD result in MINOR or MODERATE INJURY. NOTICE Addresses practices not related to personal injury. PAGE 6 — TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19)
  • Page 7 „ ALWAYS check the equipment for loosened threads or bolts before starting. „ DO NOT use the equipment for any purpose other than its intended purposes or applications. TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19) — PAGE 7...
  • Page 8 WARNING „ Rotating blade can cut and crush. ALWAYS keep hands and feet clear while operating the saw. PAGE 8 — TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19)
  • Page 9 „ ALWAYS make certain that proper power or extension cord has been selected for the job. „ Protect the cable from heat, oil, and sharp edges. TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19) — PAGE 9...

  • Page 10: Specifications

    115V, 60 Hz — 100 GPH Weight 103 lbs. (46.7 kg) Table 2. Electric Motor Specifications Horsepower 1-1/2 Volts Amps Motor RPM 3450 RPM Cycle Phase Class PAGE 10 — TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19)

  • Page 11: Dimensions

    DIMENSIONS Figure 1. Dimensions Table 3. Dimension Reference Letter Dimensions 38.2 in. (970mm) 22.6 in. (574 mm) 20.6 in. (523 mm) TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19) — PAGE 11...

  • Page 12: General Information

    „ Diamond Blade — 10-inch (254 mm) premium tile blade included. PAGE 12 — TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19)
  • Page 13 NOTES TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19) — PAGE 13...

  • Page 14: Saw Components

    SAW COMPONENTS Figure 2. Saw Components PAGE 14 — TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19)
  • Page 15 12. Blade Guard Brushes — Prevents foreign matter and debris from accumulating on the saw blade. Replace brushes immediately when they become worn or damaged. TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19) — PAGE 15...

  • Page 16: Electric Motor Components

    Figure 4. Support Stand Assembly „ Water Tray „ Rear Drip Tray „ Drain Plug „ Owner’s Manual „ Universal Wrench „ MasterGuide Template Base „ Saw Blade PAGE 16 — TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19)

  • Page 17: Set-Up

    Figure 6. Figure 7. Rear Drip Tray ELECTRIC MOTOR CONDUIT BOX POWER PLUG WATER ELECTRIC WATER PUMP PUMP AC RECEPTACLE Figure 6. Water Pump Power Connection TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19) — PAGE 17...
  • Page 18 “under cutting” condition brought about by highly abrasive material or improper under cutting core protection. PAGE 18 — TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19)
  • Page 19 Do not cut too deep or too fast into the material. Do not cut any material not recommended by blade Inspect segment blades for segment cracking or loss. manufacturer. Do not use damaged blades. TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19) — PAGE 19...
  • Page 20 If possible use a ground fault circuit interrupter to protect the operator Figure 12. Cutting Table from possible electric shock. PAGE 20 — TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19)

  • Page 21: Sawing Guides

    Tighten the threaded knob to secure the miter block in place. 3. Place material onto miter block and you are ready to cut. TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19) — PAGE 21...

  • Page 22: Operation

    WARNING the rotating saw blade. ALWAYS ensure that the cutting blade has been mounted correctly. PAGE 22 — TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19)
  • Page 23 5. Store saw in a clean dry location where it will be out of the reach of children. TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19) — PAGE 23...

  • Page 24: Maintenance

    15. Grease pivot bearings periodically. a day in heavy cutting. The sludge is abrasive and will shorten the life of the water pump and blades. PAGE 24 — TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19)
  • Page 25 If the motor does not run, have the machine inspected by a qualified electrician. Figure 18. Water Tray Removal TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19) — PAGE 25...
  • Page 26 ADJUSTMENT KNOB sure belt is at the proper tension before tightening the four bolts at the base of the motor. Figure 20. Cutting Head Removal PAGE 26 — TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19)
  • Page 27 7. After aligning the belt, tighten the hex screw. 8. Replace the belt guard and lock into place using 4 screws. PULLEY BEARING HOUSING INNER FLANGE Figure 21. Bearing Housing Removal TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19) — PAGE 27...
  • Page 28 A gap exceeding the allowed tolerance means that the table is not moving parallel to the blade; hence, Figure 24. Adjust Right Guide Rail PAGE 28 — TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19)
  • Page 29 FLAT SCREW DRIVER GUIDE ROLLER HORIZONTAL ROLLER SHIM 13MM SOCKET WRENCH RUBBER CAP C RUBBER Figure 28. Add Shims CAP B Figure 26. Lowering Roller TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19) — PAGE 29...
  • Page 30 1. Be sure to tighten the lock nuts and replace the rubber caps. FLAT ROLLERS ROTATE IN THIS MANNER Figure 29. Flat Roller Rotation PAGE 30 — TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19)

  • Page 31: Wiring Diagram (Electric Motor)

    Power Outlet for Water Pump Black Motor White Green Power Cable White White Switch Black Black Black Overcurrent Breaker Wiring Box Figure 30. Electric Motor Wiring Diagram TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19) — PAGE 31...

  • Page 32: Troubleshooting (Blade)

    Poor tension in blade material Have the saw blade tensioned The material feed is too high; proceed more Too much load on the saw blade slowly PAGE 32 — TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19)

  • Page 33: Troubleshooting (Saw)

    Clean the filter of the water pump water at all Pump wheel of the immersion pump is Disassemble the immersion pump and clean it blocked by dirt TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19) — PAGE 33...

  • Page 34: Explanation Of Code In Remarks Column

    “Remarks” Column. assembly/kit that can be purchased, or is not available for sale through Multiquip. PAGE 34 — TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19)

  • Page 35: Suggested Spare Parts

    1....TPS80008 .....V-BELT 1....TPS100003 ...SWITCH, TOGGLE 15A NOTICE Part numbers on this Suggested Spare Parts list may supersede/replace the part numbers shown in the following parts lists. TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19) — PAGE 35...

  • Page 36: Main Saw Assy

    MAIN SAW ASSY. CUTTING TABLE PAGE 36 — TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19)
  • Page 37 SLIDER TP25058 HEX BOLT M8X0.8X15L TP110029 DRIP GUARD TP0121 WASHER SPRING M8 TP0120 WASHER NARROW M8 TP110033 848L LEFT/RIGHT RAIL TP0119 NUT, M8 X 1.25 TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19) — PAGE 37...

  • Page 38: Cutting Head Assy

    CUTTING HEAD ASSY. BEARING HOUSING ASSY. PAGE 38 — TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19)
  • Page 39 SET SCREW M6X1.0X10L TPS800241 FAN MOTOR TP0412732 WASHER SPRING M4 TP420294 NUT, M4 X 0.7 - TP24X TP040703003 SCREW CROSS M4X0.7X30L TPS80004 CAPACITOR RUN TPS80005 CAPACITOR START TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19) — PAGE 39...

  • Page 40: Cutting Table Assy

    CUTTING TABLE ASSY. SIDE EXTENSION TABLE (OPTION) PAGE 40 — TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19)
  • Page 41 HEX BOLT M8X1.25X25L TP1061 HEX BOLT M8X1.25X40L TP0384 WASHER NARROW M6 TP0120 WASHER NARROW M8 TP100109 HEX BOLT M8X1.25X20L TP110023 CUTTING TABLE ASSY........1....INCLUDES ITEMS W/@ TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19) — PAGE 41...

  • Page 42: Blade Guard Assy

    BLADE GUARD ASSY. PAGE 42 — TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19)
  • Page 43 TP100059 D8 90° ELBOW HOSE CONNECTOR TP100060 RUBBER SPLASH GUARD TP110037 M5 RIVET TP0384 WASHER NARROW M6 TP0322 HEX BOLT M6X1.0X10L TP0353 CROSS SCREW M4X0.7X8L TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19) — PAGE 43...

  • Page 44: Bearing Housing Assy

    BEARING HOUSING ASSY. PAGE 44 — TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19)
  • Page 45 TP110016 BEARING RADIAL D47 TPS1000062 KEY, SQUARE 5X5X30L TP0316 SET SCREW FLAT PT M6X1.0X10L TP110034 HOSE, BLADE GUARD TP110035 HOSE, WATER PUMP TP100124 M17 E-CLIP TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19) — PAGE 45...

  • Page 46: Switch Box Assy

    SWITCH BOX ASSY. PAGE 46 — TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19)
  • Page 47 SCREW CROSS M4X0.7X15L TP420291 SHIELD POWER SWITCH TPS1000032 BOOT POWER SWITCH TPS1000041 BOOT RESET BUTTON TP420294 NUT, M4 X 0.7 TPS100005N SWITCH BOX ASSY..........1....INCLUDES ITEMS W/@ TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19) — PAGE 47...

  • Page 48: Tools And Accessories

    TOOLS AND ACCESSORIES PAGE 48 — TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19)
  • Page 49 MASTER GUIDE TEMPLATE BASE TPS1000MG1 DETACHABLE RULER GUIDE ......1....OPTIONAL TPS100034 MITER BLOCK ...........1....OPTIONAL TPS1000MG MASTER GUIDE ..........1....OPTIONAL TP100102 SIDE EXTENSION TABLE .........1....OPTIONAL TPSDT1000SW SAW STAND ............1....OPTIONAL TP24X TILE SAW • OPERATION AND PARTS MANUAL — REV. #4 (09/12/19) — PAGE 49...
  • Page 50 © COPYRIGHT 2019, MULTIQUIP INC. Multiquip Inc , the MQ logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written permission. All other trademarks are the property of their respective owners and used with permission.

Table of Contents