MULTIQUIP SP113H18 Operation And Parts Manual
  1. Manuals
  2. Brands
  3. MULTIQUIP Manuals
  4. Saw
  5. SP113H18
  6. Operation and parts manual

MULTIQUIP SP113H18 Operation And Parts Manual

Street pro 1 series 5 hp electric motor / honda gx390 gasoline engine concrete/asphalt saw
Hide thumbs
Table of Contents

Advertisement

Quick Links

OPERATION AND PARTS MANUAL
STREET PRO 1 SERIES
MODEL SP113H18
(HONDA GX390 GASOLINE ENGINE)
MODEL SP15E16
(5 HP ELECTRIC MOTOR)
CONCRETE/ASPHALT SAW
Revision #6 (06/09/08)
To find the latest revision of this
publication, visit our website at:
www.multiquip.com
THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
P/N 35100

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SP113H18 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for MULTIQUIP SP113H18

Summary of Contents for MULTIQUIP SP113H18

  • Page 1: Proposition 65 Warning

    OPERATION AND PARTS MANUAL STREET PRO 1 SERIES MODEL SP113H18 (HONDA GX390 GASOLINE ENGINE) MODEL SP15E16 (5 HP ELECTRIC MOTOR) CONCRETE/ASPHALT SAW Revision #6 (06/09/08) To find the latest revision of this publication, visit our website at: www.multiquip.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.

  • Page 2: Silicosis/Respiratory Warnings

    MQ STREET PRO 1 SAW — PROPOSITION 65 WARNING Engine exhaust some its constituents, and some dust created by power sanding, sawing, grinding, drillingandotherconstructionactivities contains chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. Some examples of these chemicals are: Leadfromlead-basedpaints.

  • Page 3: Table Of Contents

    MQ STREET PRO 1 SAW — SILICOSIS/RESPIRATORY WARNINGS WARNING WARNING SILICOSIS WARNING RESPIRATORY HAZARDS Grinding/cutting/drilling of masonry, concrete, metal and Grinding/cutting/drilling of masonry, concrete, metal and other materials with silica in their composition may give other materials can generate dust, mists and fumes off dust or mists containing crystalline silica.

  • Page 4: Table Of Contents

    MQ STREET PRO 1 SAW — TABLE OF CONTENTS Proposition 65 Warning ..........2 HONDA GX390K1QWT2/ Silicosis/Respiratory Warnings ........3 GX390U1QWT2 ENG. Table Of Contents ............. 4 Air Cleaner Assembly......... 42-43 Parts Ordering Procedures ........5 Camshaft Assembly ........... 44-45 Safety Message Alert Symbols ......

  • Page 5: Safety Message Alert Symbols

    MULTIQUIP SP 1. For engine maintenance information, please refer to the engine manufacturers instructions for data relative to its safe operation.
  • Page 6 MQ STREET PRO 1 SAW — SAFETY MESSAGE ALERT SYMBOLS Accidental Starting Respiratory Hazard ALWAYS place the engine ON/OFF switch in the OFF position, when the saw ALWAYS wear approved respiratory protection. is not in use. Over Speed Conditions Sight and Hearing hazard NEVER tamper with the factory settings of the engine governor or settings.

  • Page 7: Rules For Safe Operation

    , or if fuel is spilled on a hot! ■ NEVER use accessories or attachments, which are not engine. recommended by Multiquip for this equipment. Damage to the equipment and/or injury to user may result. ■ Manufacturer does not assume responsibility for any accident ■...
  • Page 8 MQ STREET PRO 1 SAW — RULES FOR SAFE OPERATION ■ ALWAYS store equipment properly when it is not being used. Electric Saws Equipment should be stored in a clean, dry location out of ■ ALWAYS connect the motor to a power source in compliance the reach of children.
  • Page 9 MQ STREET PRO 1 SAW — RULES FOR SAFE OPERATION Saw Transportation Safety Machine Operation And Safety Decals ■ Use appropriate lifting equipment to ensure the safe The SP 1 is equipped with a number of operation and safety movement of the saw. decals.

  • Page 10: Specifications (Saw)

    MQ STREET PRO 1 SAW — SPECIFICATIONS (SAW) Side View Front View Figure 2. SP 1 Dimensions i f i o i t r e t e s i r e t . n I ) g . SP 1 SAW — OPERATION AND PARTS MANUAL — REV. #6 (06/09/08) — PAGE 11...

  • Page 11: Specifications (Engine)

    MQ STREET PRO 1 SAW — SPECIFICATIONS (ENGINE) i f i o i t - r i r t s i l y , r e i l o . n i o r t p s i . n i / .

  • Page 12: General Information

    MQ STREET PRO 1 SAW — GENERAL INFORMATION General Information All MQ Whiteman SP1 series saws are designed, engineered and manufactured with strict adherence to American National The MQ Whiteman SP1 series walk-behind saws are designed Standards Institute, Inc. (ANSI) guidelines B7.1 and B7.5. for wet or dry cutting of concrete or asphalt utilizing Diamond Blades.

  • Page 13: Mq - Street Pro 1 Saw Controls & Components

    MQ STREET PRO 1 SAW — CONTROLS & COMPONENTS CONTROLS & COMPONENTS Cutting Blade – Use appropriate type blades for cutting concrete or asphalt. Figures 3 shows the location of the basic controls or components for the SP 1. Listed below is a brief explanation of each control or Blade Guard –...

  • Page 14: Basic Engine

    MQ STREET PRO 1 SAW — BASIC ENGINE BASIC ENGINE Figure 4. Engine Controls and Components Choke Lever – Used in the starting of a cold engine, or in Initial Servicing cold weather conditions. The choke enriches the fuel The engine (Figure 4) must be checked for proper lubrication and mixture.

  • Page 15: Preparation/Pre-Inspection

    MQ STREET PRO 1 SAW — PREPARATION/PRE-INSPECTION PREPARATION / PRE-INSPECTION WARNING 1. Read and fully understand this manual, ALWAYS use a grounded (3-wire) extension cord and MAKE the safety intructions in particular, and CERTAIN that the motor is connected to a properly grounded the engine manufacturer's manual electric circuit to protect the operator from possible electric shock.
  • Page 16 MQ STREET PRO 1 SAW — PREPARATION/PRE-INSPECTION 3. Insert and remove the dipstick without screwing it into the filler Guards And Covers neck. Check the oil level shown on the dipstick. WARNING 4. If the oil level is low (Figure 7), fill to the edge of the oil filler hole with the recommended oil type (Table 4).
  • Page 17 MQ STREET PRO 1 SAW — PREPARATION/PRE-INSPECTION V-belt Alignment and Tensioning This saw is equipped with a premium V-belt that has been aligned and tensioned by factory personnel. The V-belt must be aligned and tensioned for proper operation of the saw. Use the following procedure to check the alignment of V-belt: 1.

  • Page 18: Blades

    MQ STREET PRO 1 SAW— BLADES BLADES 2. Edge of the Steel Core - Check the diameter edge for discoloration (blue oxidation) indicating an overheating Saw blades, or cutting disks, are available in either an abrasive condition caused by insufficient cooling water/air. design or as diamond blades.

  • Page 19: Blade Placement

    MQ STREET PRO 1 SAW— BLADE PLACEMENT BLADE PLACEMENT WARNING WARNING Dropping or forcing the blade onto the cutting Failure to thoroughly inspect the diamond surface can severely blade for operational safety could result in damage the diamond blade and may damage to the blades or the saw and may cause serious damage to the saw and cause injury to the user or others in the...

  • Page 20: Initial Start-Up

    MQ STREET PRO 1 SAW — INITIAL START-UP INITIAL START-UP 3. Place the Engine ON/OFF switch (Figure 13) in the "ON" position. CAUTION CAUTION CAUTION CAUTION CAUTION DO NOT attempt to operate the saw until the Safety, General Information and Inspection sections of this manual have been read and thoroughly understood.

  • Page 21: Operation

    MQ STREET PRO 1 SAW — INITIAL START-UP/OPERATION 5. Rotate the throttle lever (Figure 15) halfway between fast 8. Before the saw is placed into operation, run the engine for and slow for starting. All sawing is done at full throttle . The several minutes.

  • Page 22: Maintenance

    MQ STREET PRO 1 SAW — MAINTENANCE MAINTENANCE 3. Adjust the front pointer wheel so it just touches the side of the straight-edge or level. See the engine manual supplied 4. Remove the straight-edge or level. NOTE with your machine for appropriate engine maintenance schedule and 5.
  • Page 23 MQ STREET PRO 1 SAW — MAINTENANCE Dispose of used oil properly. DO NOT pour used oil on the ground, down a drain, or throw in the trash. NOTE Used oil can generally be taken to your local recycling center or service station for reclamation.

  • Page 24: Troubleshooting (Saw)

    MQ STREET PRO 1 SAW — TROUBLESHOOTING (SAW) t l u r e l i t l u r o f e r r i t t a i r t f o a i r l i s a c i i r b , k c n i c...

  • Page 25: Troubleshooting (Engine)

    MQ STREET PRO 1 SAW — TROUBLESHOOTING (ENGINE) i t a l i r b t i s c i f f t l u t r a f " , s i l l i a t r o r i c i u c i c i f...
  • Page 26 MQ STREET PRO 1 SAW — TROUBLESHOOTING (ENGINE) r i A r i a e l c . r e o l f s u j . t n l e v " " r e i s s d l i t e r .

  • Page 27: Explanation Of Codes In Remarks Column

    Multiquip. A blank entry generally indicates that the item is not sold separately or is not sold by Multiquip. Other entries will be clarified in the “Remarks” Column. PAGE 28 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV. #6 (06/09/08)

  • Page 28: Suggested Spare Parts

    MQ STREET PRO 1 SAW — SUGGESTED SPARE PARTS SUGGESTED SPARE PARTS MQ STREET PRO 1 CONCRETE/ASPHALT SAW 1 TO 3 UNITS WITH HONDA 13 HP GX390K1QWT2/GX390U1QWT2 ENGINES AND 5HP ELECTRIC MOTOR. 1 to 3 Units Qty..P/N ......Description 20478 ....

  • Page 29: Nameplate And Decals

    P/N 36099 (ISO Blue) “BELT DRIVE” P/N 25782 P/N 25783 P/N 13118 P/N 25783 MODEL SERIAL NO. BELT DRIVE CLOCKWISE CONTACT MULTIQUIP SERVICE DEPARTMENT WARNING Nasfsaer dfghhte thsfaw wiot Nesfaer dfgat GEAR DRIVE GEAR DRIVE the sfarbs in saccty guizcin...
  • Page 30 MQ STREET PRO 1 SAW — DECALS DECALS PART NO. PART NAME QTY. REMARKS 25215-001 DECAL, WARNING ......1 ..ELECTRIC MODEL ONLY 20525 DECAL, PROP 65 WARNING 13118 DECAL, POWDER COATED 25782 DECAL, MQ DIAMONDBACK 25783 DECAL, SP 1 11247 DECAL, ISO SAFETY GEAR 22122-001...

  • Page 31: Engine, Belts And Pulleys Assembly

    MQ STREET PRO 1 SAW — ENGINE, BELTS AND PULLEYS ENGINE, BELTS AND PULLEYS PAGE 32 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV. #6 (06/09/08)
  • Page 32 MQ STREET PRO 1 SAW— ENGINE, BELTS AND PULLEYS ENGINE, BELTS AND PULLEYS PART NO. PART NAME QTY. REMARKS 15103 ENGINE 13 HP HONDA RED 9152 KEY, 1/4 X 1-3/4 0669A SCREW. HHCS 5/16-18 x 2-1/4" 0300B FLAT WASHER 5/16" 5283 NUT, 5/16 - 18 LOCK 23811-352...

  • Page 33: Electric Motor Assembly

    MQ STREET PRO 1 SAW — ELECTRIC MOTOR ELECTRIC MOTOR PAGE 34 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV. #6 (06/09/08)
  • Page 34 MQ STREET PRO 1 SAW — ELECTRIC MOTOR ELECTRIC MOTOR PART NO. PART NAME QTY. REMARKS 26142-754 BELT GUARD RED 16779-006 BELT - 3VX300 23665-005 PULLEY (MOTOR) 26152-502 MOTOR, 5 HP ELECTRIC 27084-002 SPACER 23665-009 PULLEY (SPINDLE) 26145-351 FRAME 25215-001 LABEL, WARNING 23865-001 SCREW, 10 - 24 X 3/4...

  • Page 35: Undercarriage Assembly

    MQ STREET PRO 1 SAW — UNDERCARRIAGE UNDERCARRIAGE PAGE 36 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV. #6 (06/09/08)
  • Page 36 MQ STREET PRO 1 SAW — UNDERCARRIAGE UNDERCARRIAGE PART NO. PART NAME QTY. REMARKS 08233-005 LOCKNUT, 5/16 - 18 18637-001 KNOB 0161D HEX NUT, 5/16 - 18 25496 BUSHING 28808-002 CRANK HANDLE 26164-001 LOCK PIN 4568 ROLL PIN 3/16 X 1 07046-011 BOLT, CARRIAGE 5/16-18 X 1-1/2 23284-001...

  • Page 37: Blade Assembly & Water System Assembly

    MQ STREET PRO 1 SAW — BLADE ASSEMBLY & WATER SYSTEM BLADE ASSEMBLY & WATER SYSTEM PULLEY ASSEMBLY. SEE PAGE 30. PAGE 38 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV. #6 (06/09/08)
  • Page 38 MQ STREET PRO 1 SAW — BLADE ASSEMBLY & WATER SYSTEM BLADE ASSEMBLY & WATER SYSTEM PART NO. PART NAME QTY. REMARKS 22129-001 CLAMP 0948 FLATWASHER, 1/4 0181B LOCK WASHER 1/4 0949 HEX NUT 1/4 - 20 0424 SCREW, HHCS 1/4 - 20 X 1 29406-753 BLADE GUARD 18"...

  • Page 39: Pointer Assembly

    MQ STREET PRO 1 SAW — POINTER ASSEMBLY POINTER ASSEMBLY PAGE 40 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV. #6 (06/09/08)
  • Page 40 MQ STREET PRO 1 SAW — POINTER ASSEMBLY POINTER ASSEMBLY PART NO. PART NAME QTY. REMARKS 21017 SCREW, POINTER ARM 29043-001 WHEEL, POINTER 1007 NUT, HEX JAM 3/8 - 16 1456 NUT, HEX FINISH 3/8 - 16 10133 NUT, NYLOC 3/8 - 16 27073-001 ARM, POINTER 10136...

  • Page 41: Honda Gx390K1Qwt2/ Gx390U1Qwt2 Eng

    HONDA GX390K1QWT2/GX390U1QWT2 ENG. — AIR CLEANER ASSY. AIR CLEANER ASSY. PAGE 42 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV. #6 (06/09/08)
  • Page 42 HONDA GX390K1QWT2/GX390U1QWT2 ENG. — AIR CLEANER ASSY. AIR CLEANER ASSY. PART NO. PART NAME QTY. REMARKS 16271ZE2000 GASKET, ELBOW 1◊ ◊ ◊ ◊ ◊ 16271ZE2010 GASKET, ELBOW 17210ZE3010 ELEMENT, AIR CLEANER ......1 ..INCLUDES ITEMS W/ 17218ZE3000 FILTER, OUTER 17219ZE3840 SEAL, AIR CLEANER COVER 17230ZE3841...
  • Page 43 HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CAMSHAFT ASSY. CAMSHAFT ASSY. PAGE 44 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV. #6 (06/09/08)

  • Page 44: Camshaft Assembly

    HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CAMSHAFT ASSY. CAMSHAFT ASSY. PART NO. PART NAME QTY. REMARKS 14100ZF6W01 CAMSHAFT ASSEMBLY ......1 ..INCLUDES ITEM W/ 14410ZE3013 ROD, PUSH 14431ZE2010 ARM, VALVE ROCKER 14441ZE2000 LIFTER, VALVE 14451ZE1013 PIVOT, ROCKER ARM 14568ZE1000 SPRING, WEIGHT RETURN 14711ZE3000 VALVE, INTAKE 14721ZE3000...

  • Page 45: Carburetor Assembly

    HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CARBURETOR ASSY. CARBURETOR ASSY. PAGE 46 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV. #6 (06/09/08)
  • Page 46 HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CARBURETOR ASSY. CARBURETOR ASSY. PART NO. PART NAME QTY. REMARKS 16010ZE2812 CARBURETOR, GASKET SET INCLUDES ITEMS W/ 16011ZA0931 VALVE SET, FLOAT 16013ZA0931 FLOAT SET 16015ZE8005 CHAMBER SET, FLOAT ...... 1 ..... INCLUDES ITEM 4A ................INCLUDES ITEM W/> GASKET, CHAMBER SET FLOAT ......

  • Page 47: Control Assembly

    HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CONTROL ASSY. CONTROL ASSY. PAGE 48 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV. #6 (06/09/08)
  • Page 48 HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CONTROL ASSY. CONTROL ASSY. PART NO. PART NAME QTY. REMARKS 16551ZE3000 ARM, GOVERNOR 16555ZE3000 ROD, GOVERNOR 16561ZE3000 SPRING, GOVERNOR 16562ZE3000 SPRING, THROTTLE RETURN 16570ZE3W20 CONTROL ASSY. (REMOTE) ....1 ..INCLUDES ITEMS W/ 16571ZE3W00 LEVER, CONTROL 16574ZE1000 SPRING, LEVER 16575ZE2W00...

  • Page 49: Crankcase Cover Assembly

    HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CRANKCASE ASSY. CRANKCASE COVER ASSY. PAGE 50 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV. #6 (06/09/08)
  • Page 50 HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CRANKCASE ASSY. CRANKCASE COVER ASSY. PART NO. PART NAME QTY. REMARKS 11300ZE3602 COVER ASSY., CRANKCASE ......1 ....S/N 3287256 AND BELOW .................... INCLUDES ITEMS W/ > 11300ZE3604 COVER ASSY., CRANKCASE ......1 ....S/N 3287257 AND ABOVE ....................

  • Page 51: Crankshaft Assembly

    HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CRANKSHAFT ASSY. CRANKSHAFT ASSY. PAGE 52 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV. #6 (06/09/08)
  • Page 52 HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CRANKSHAFT ASSY. CRANKSHAFT ASSY. PART NO. PART NAME QTY. REMARKS 13310ZF6W10 CRANKSHAFT .......... 1 ..INCLUDES ITEM W/ 2◊ ◊ ◊ ◊ ◊ 13310ZF6W11 CRANKSHAFT .......... 1 ..INCLUDES ITEM W/ # ................S/N 1113739 AND BELOW 2◊...

  • Page 53: Cylinder Barrel Assembly

    HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. PAGE 54 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV. #6 (06/09/08)
  • Page 54 HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. PART NO. PART NAME QTY. REMARKS 12000ZF6W13 CYLINDER ASSY. (ALERT) ....1 ....INCLUDES ITEMS W/ % 1◊ ◊ ◊ ◊ ◊ 12000ZF6417 CYLINDER ASSY........1 ....INCLUDES ITEMS W/ # 15510ZE2043 SWITCH ASSY., OIL LEVEL 2◊...

  • Page 55: Cylinder Head Assembly

    HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. PAGE 56 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV. #6 (06/09/08)
  • Page 56 HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. PART NO. PART NAME QTY. REMARKS 12200ZF6W01 CYLINDER HEAD ..........1 ....INCLUDES ITEMS W/ 1◊ ◊ ◊ ◊ ◊ 12200ZF6406 CYLINDER HEAD ..........1 ....INCLUDES ITEMS W/ % 12204ZE2306 GUIDE, VALVE (OS) (OPTIONAL) 12205ZE2305 GUIDE, EX.

  • Page 57: Fan Cover Assembly

    HONDA GX390K1QWT2/GX390U1QWT2 ENG. — FAN COVER ASSY. FAN COVER ASSY. PAGE 58 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV. #6 (06/09/08)
  • Page 58 HONDA GX390K1QWT2/GX390U1QWT2 ENG. — FAN COVER ASSY. FAN COVER ASSY. PART NO. PART NAME QTY. REMARKS 16731ZE2003 CLIP, TUBE 19610ZE3010ZB COVER, FAN *NH1* (BLACK) 19631ZE3W00 SHROUD 36100ZH7003 SWITCH ASSY., ENGINE STOP 13◊ ◊ ◊ ◊ ◊ 36100ZF6P81 SWITCH ASSY., ENGINE STOP ....1 ....S/N 1412956 AND BELOW 13◊...

  • Page 59: Flywheel Assembly

    HONDA GX390K1QWT2/GX390U1QWT2 ENG. — FLYWHEEL ASSY. FLYWHEEL ASSY. PAGE 60 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV. #6 (06/09/08)
  • Page 60 HONDA GX390K1QWT2/GX390U1QWT2 ENG. — FLYWHEEL ASSY. FLYWHEEL ASSY. PART NO. PART NAME QTY. REMARKS 19511ZE3000 FAN, COOLING 28450ZE3W11 PULLEY, STARTER (SCREEN GRID) 31100ZE3701 FLYWHEEL 90201ZE3V00 NUT, SPECIAL (16MM) (1) 10◊ ◊ ◊ ◊ ◊ 90201ZE3V00 NUT, SPECIAL (16MM) (1) ......1 ....S/N 1317976 AND BELOW 10◊...

  • Page 61: Fuel Tank Assembly

    HONDA GX390K1QWT2/GX390U1QWT2 ENG. — FUEL TANK ASSY. FUEL TANK ASSY. PAGE 62 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV. #6 (06/09/08)
  • Page 62 HONDA GX390K1QWT2/GX390U1QWT2 ENG. — FUEL TANK ASSY. FUEL TANK ASSY. PART NO. PART NAME QTY. REMARKS 16854ZH8000 RUBBER, SUPPORTER (107MM) 16955ZE1000 JOINT, FUEL TANK 17510ZE3010ZB TANK, FUEL *NH1* 6◊ ◊ ◊ ◊ ◊ 17510ZE3020ZB TANK, FUEL *NH1* ........... 1..S/N 1213085 AND BELOW 6◊...

  • Page 63: Ignition Coil Assembly

    HONDA GX390K1QWT2/GX390U1QWT2 ENG. — IGNITION COIL ASSY. IGNITION COIL ASSY. PAGE 64 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV. #6 (06/09/08)
  • Page 64 HONDA GX390K1QWT2/GX390U1QWT2 ENG. — IGNITION COIL ASSY. IGNITION COIL ASSY. PART NO. PART NAME QTY. REMARKS 30500ZF6W02 COIL ASSY., IGNITION 1◊ ◊ ◊ ◊ ◊ 30500ZF6W02 COIL ASSY., IGNITION ........1..S/N 1411816 AND BELOW 1◊ ◊ ◊ ◊ ◊ 30500ZF6W03 COIL ASSY., IGNITION ........

  • Page 65: Muffler Assembly

    HONDA GX390K1QWT2/GX390U1QWT2 ENG. — MUFFLER ASSY. MUFFLER ASSY. PAGE 66 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV. #6 (06/09/08)
  • Page 66 HONDA GX390K1QWT2/GX390U1QWT2 ENG. — MUFFLER ASSY. MUFFLER ASSY. PART NO. PART NAME QTY. REMARKS 18310ZE2W61 MUFFLER 18320ZE2W61 PROTECTOR, MUFFLER 18330ZE2W00 PIPE, EX. 18331ZE3810 CAP, MUFFLER 6◊ ◊ ◊ ◊ ◊ 18331ZE3810 CAP, MUFFLER ............1 ..S/N 1166160 AND BELOW 6◊...

  • Page 67: Piston Assembly

    HONDA GX390K1QWT2/GX390U1QWT2 ENG. — PISTON ASSY. PISTON ASSY. PAGE 68 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV. #6 (06/09/08)
  • Page 68 HONDA GX390K1QWT2/GX390U1QWT2 ENG. — PISTON ASSY. PISTON ASSY. PART NO. PART NAME QTY. REMARKS 13010ZF6005 RING SET, PISTON (STD) 13011ZF6005 RING SET, PISTON (0.25) 13012ZF6005 RING SET, PISTON (0.50) 13013ZF6005 RING SET, PISTON (0.75) 13101ZF6W00 PISTON (STD) 13102ZF6W00 PISTON (0.25) 13103ZF6W00 PISTON (0.50) 13104ZF6W00...

  • Page 69: Recoil Starter Assembly

    HONDA GX390K1QWT2/GX390U1QWT2 ENG. — RECOIL STATER ASSY. RECOIL STARTER ASSY. PAGE 70 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV. #6 (06/09/08)
  • Page 70 HONDA GX390K1QWT2/GX390U1QWT2 ENG. — RECOIL STATER ASSY. RECOIL STARTER ASSY. PART NO. PART NAME QTY. REMARKS 28400ZE3W01ZB STARTER ASSY., RECOIL *NH1* (BLACK) ....1 ..INCLUDES ITEMS W/ 28410ZE3W01ZB CASE, RECOIL STARTER *NH1* (BLACK) 28421ZE3W01 PULLEY, RECOIL STARTER 28422ZE2W01 RATCHET, STARTER 28441ZE2W01 SPRING, FRICTION 28442ZE2W01...

  • Page 71: Labels

    HONDA GX390K1QWT2/GX390U1QWT2 ENG. — LABELS ASSY. LABELS ASSY. PAGE 72 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV. #6 (06/09/08)
  • Page 72 HONDA GX390K1QWT2/GX390U1QWT2 ENG. — LABELS ASSY. LABELS ASSY. PART NO. PART NAME QTY. REMARKS 87522ZH9010 LABEL, CAUTION(ENGLISH ETC.) 1◊ ◊ ◊ ◊ ◊ 87516ZH7000 MARK OPERATOR CAUTION 1◊ ◊ ◊ ◊ ◊ 87516ZH7810 MARK OPERATOR PICTOGRAPH (OPTION) 87521ZF6W02 EMBLEM (GX390 HONDA 13.0) 2◊...

  • Page 73: Terms And Conditions Of Sale - Parts

    NOTE PAGE SP 1 SAW — OPERATION AND PARTS MANUAL — REV. #6 (06/09/08) — PAGE 75...
  • Page 74 © COPYRIGHT 2008, MULTIQUIP INC. Multiquip Inc, the MQ logo and the Diamond Back logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written permission. All other trademarks are the property of their respective owners and used with permission.

This manual is also suitable for:

Sp15e16

Table of Contents