Registering Additional Handsets - Motorola ME7158 Series User Manual

Registering Additional Handsets

Your handset can be registered for use with up to 4 different base stations.
A maximum of 6 handsets can be registered to use with your base station.
Note: Any additional handsets must be GAP compatible. Even if a handset meets GAP
standards, it is still possible some handset functions will not be available.
To register a new handset to your base, you need to put the base into registration mode:
At the base:
1. Press and hold the Page key. The base will beep twice and the orange light will flash
for one minute.
On the handset, in the base settings menu:
1. Press the or key to display Register handset and press the
to select.
2. Press the or key to select the number of the base you want to register the
handset to and press the
Note: The base stations that your handset is already registered to will be
indicated by **.
3. Enter the handset PIN code and press the
If the correct PIN is entered, the handset displays Searching while it attempts
to connect with the base station. If registration is successful, OK is displayed.
4. Press the key to return to standby mode.
Once the registration procedure is complete, the new handset will automatically
be allocated the next available handset number. This number will be shown on
the display.
key to confirm.
key to confirm.
key
47