Registering Additional Handsets - Motorola ME4264 Series User Manual

Registering Additional Handsets

Your ME4264 handset can be registered for use with up to 4 different base stations.
A maximum of 6 handsets can be registered to use with your ME4264 base station.
Note: Any additional handsets must be GAP compatible. Even if a handset meets GAP
standards, it is still possible some handset functions will not be available.
To register a new handset to your ME4264 base, you need to put the base into
registration mode:
At the base:
1. Press and hold the Page key. The base will beep twice and the red light will flash for
one minute.
On the handset, in the base settings menu:
1. Press the
to select.
2. Press the
handset to and press the SKL key to confirm.
Note: The base stations that your handset is already registered to will be
indicated by **.
3. Enter the handset PIN code and press the SKL key to confirm.
If the correct PIN is entered, the handset displays Searching while it attempts
to connect with the base station. If registration is successful, OK
is displayed.
4. Press the
Once the registration procedure is complete, the new handset will automatically
be allocated the next available handset number. This number will be shown on
the display.
48
or key to display Register and press the SKL key
or key to select the number of the base you want to register the
key to return to standby mode.