See page 37 for details on how to store a prefix number.
Dialling from the Phone Book
Note: To store a number in the Phone Book, see "Storing entries" on page 23.
In standby mode:
1. Press the
key to enter the phone book.
Note: If the phonebook is empty, No Records will be displayed for 2 seconds.
2. The first entry in the phone book is displayed. Press the
entry you want.
3. Press the
key to dial the number.
Note: If the entry contains more than one number, press the SKL key to view the
details of the entry, then press the up or down key to select the required number and
press the Talk key to dial the number.
4. Press the
key to end the call.
Access a Call Waiting Line / Holding and transferring calls (PABX)
When on an external call, press
the call waiting prompt signal. Press
When on an external call (PABX line)
key to put the call on hold.
2. Dial the number of the extension.
key again if you would like to take back the call, or
Note: If several handsets are registered on the base station and a call should be put on
hold or transferred, press the
Calling with More Than One Handset
Note: To make/receive internal calls, transfer calls or hold a teleconference you need to
have more than one handset registered to your base station.
key to access a Call Waiting Line when you hear
key again to toggle between the two calls.
key instead of
key to display the
to transfer the call.