Activating/Deactivating Call Timer; Default Settings; Registering Additional Handsets - Motorola ME4066 Series User Manual

Activating/Deactivating Call Timer

It is possible to display the duration of a call on the handset. The timer starts when
the conversation begins.
1. Press the key as often as necessary until the HANDSET menu appears.
2. Press the
3. Press the or
4. Press the
5. Use the or
6. Press the

Default Settings

The handsets can be reset to the default settings. In doing so, all the settings which
you have changed are returned to their default values. The phone book entries are
retained.
1. Press the key as often as necessary until the HANDSET menu appears.
2. Press the
3. Press the or
4. Press the
5. Press the
Note: The handset is reset to its default settings.

Registering Additional Handsets

Further handsets can be registered on the base station. They must support the GAP
standard, however, it is possible that some of the handset functions will not be available.
1. Press the key as often as necessary until the HANDSET menu appears.
2. Press the
3. Press the or
4. Press the
5. Press and hold the Page key on the base station until the acknowledgement signal
is heard, then enter the PIN when requested. (Default setting = 0000)
6. Press the
Note: After the connection has been established, the name and number of the handset
(the next available number if less than 4 are already registered) appear in the display
30
key.
key to select the CALL TIMER submenu.
key.
key to switch the call timer on or off.
key to confirm the setting.
key.
key to select the DEFAULT.
key.
key to confirm.
key.
key to select the REGISTER submenu.
key.
key.
29
.