Call T imer
The duration of each call is displayed. You can switch this function on and off.
1.
Press the
key as often as necessary until the HANDSET menu appears.
2.
Press the
3.
Press the
or
4.
Press the
5.
Use the
or
key to switch the call timer on or off.
6.
Press the
Restore Default Settings
The handsets can be reset to the default settings. In doing so, all the settings which
you have changed are returned to their DEFAULT values. The phone book entries will
not be affected.
1.
Press the
key until the HANDSET menu appears.
2.
Press the
3.
Press the
or
4.
Press the
5.
Press the
Note: The handset is reset to its DEFAULT settings.
Default Settings
External Ringer Melody = Melody 1
Internal Ringer Melody = Melody 2
VIP Ringer Melody = selectable when you store a new number
Ringer Volume Level 3
Receiver Volume Level 3
External Call Ring On/Off ON
Internal Call Ring On/Off ON
Registering Additional Handsets
Further handsets can be registered on the base station. They must support the GAP
standard. Please note, it is possible that some of the handset functions will not
be available.
1.
On the handset you wish to register, press the
the HANDSET menu appears.
2.
Press the
3.
Press the
or
4.
Press the
Press and hold the
5.
when requested. (Default setting = 0000)
6.
Press the
Note: After the connection has been established, the name and number of the handset
32
(the next available number if less than 4 are already registered ) appear in the display
key .
key to select the CALL TIMER submenu.
key .
key to confirm the setting.
key .
key to select the DEFAULT submenu.
key .
key to confirm the setting.
key .
key to select the REGISTER submenu.
key .
key on the base station for 2-3 seconds, then enter the PIN
key .
key as often as necessary until
31