Start Navigation - Navigon 40 essential User Manual

User's manual NAVIGON 40 Essential | Easy | Plus | Premium | Premium Live
MyRoutes
This section is relevant for you only if your navigation device is one of
the following devices:
NAVIGON 40 Easy
►
NAVIGON 40 Plus
►
NAVIGON 40 Premium
►
NAVIGON 40 Premium Live
►
When the MyRoutes function is activated, the navigation system
calculates up to three routes on the basis of the currently selected route
profile and shows them on the map in different colours (orange, green,
blue) and with a number. For each route there is a button with the same
number and a symbol in the same colour.
When calculating the time of arrival or the trip time, the navigation
system takes account of additional factors such as day of the week,
time of day or traffic messages.
The route which corresponds best to the selected route profile is
marked with "MyRoute".
Note: Even when the MyRoutes function is activated, sometimes only
one additional route or no additional routes at all can be calculated for a
particular route. No further suggestion is then shown on the button in
question.

Start Navigation

Tap on the button of the route which you want to use for the
►
navigation.
If you select a route for which traffic obstructions have been announced,
the P
REVIEW
"Preview TMC" on page 86.)
Select whether you want to use the original route (Current Route) or
►
a detour (Alternative route).
No GPS reception
If GPS signal reception is not good enough, the following message will
appear: "Waiting for GPS-Signal..."
You have the following options:
Wait. As soon as GPS reception is good enough for determining
►
your position, the route will be recalculated and navigation will
begin.
Tap on Cancel. The window in which you entered your destination
►
will open again. Your destination is saved in the L
list.
Navigation
TMC window may open before navigation starts. (Refer to
D
AST ESTINATIONS
- 41 -