Switching The Navigation Device To Standby Mode; Switching Off The Navigation Device - Navigon 40 essential User Manual

User's manual NAVIGON 40 Essential | Easy | Plus | Premium | Premium Live

Switching the navigation device to standby mode

Press briefly on the
►
A message will appear telling you that the device will be switched to
standby mode in several seconds.
Wait for the device to be switched to standby mode or tap on
►
Standby.
Automatic Standby
You can configure the navigation device so that it is automatically
switched to standby mode when not in use.
In the N
►
Automatic Standby.
Select after how much time you want the navigation device to be
►
switched to standby mode (Never, After 10 mins., After 20 mins.,
After 30 mins.).
Select Power Loss in order to switch the device to standby mode
►
when the external power supply is interrupted. As soon as the
device is connected again to the external power supply it will switch
on again automatically.

Switching off the navigation device

Press the
►
switches off (approx. 6 seconds)
-or-
1. Press briefly on the
A message will appear telling you that the device will be switched to
standby mode in several seconds.
2. Tap on Off.
Note: When you switch the navigation device to standby mode, the next
time it is switched on it will start very quickly and with the window which
was active when switched off. In standby mode the device still
consumes a small amount of energy however. Depending on how full
the battery is, it can become flat within a few days or a few weeks.
When you switch off the device, it consumes no energy. It can then take
several months for the battery to become flat. Switching the device on
again triggers a restart which can take some time (approx. 30 seconds).
Your settings and your saved destinations and routes will be retained.
Switching on the navigation device
(On/Off) key (max. 2 seconds).
window tap on Options > Settings > General >
AVIGATION
(On/Off) key and keep it pressed until the device
(On/Off) key (max. 2 second).
- 19 -