Yamaha AR240 HO Owner's Manual page 69

5) Attach the forward telescoping sup-
port poles  to their pivot bases
with the locking pins. Then, extend
the poles on both sides until the
locating buttons snap into place in
the first hole along the tubes. If the
top is not tight enough, extend the
tubes to the next hole.
NOTiCE:
do not exceed 45 mph (72 km/h)
with the Bimini top in the deployed
position.
Storing and Trailering
1) Collapse the forward support poles
and remove the locking pins.
2) Remove the locking pins from the
center support poles.
3) Pull the Bimini top to the rear of the
boat and gather it at the front bar of
the Watersports Tower.
4) Unzip the three flaps from around
the tower tubes
5) Zip the storage cover in place and
secure it to the Watersports Tower
by buckling the cover straps around
the top tubes.
NOTiCE:
do not trailer the boat with the
Bimini top in the fully extended
position. put the cover over the top
to avoid damage.
Removing the Bimini Top
1) Unbuckle the storage cover straps
(if attached).
2) Unscrew the knobs holding the
rear support arms for the Bimini
top to the Watersports Tower.
3) The top can now be removed from
your boat.
When reinstalling the Bimini top, simply
reverse the removal steps, making sure
the knobs holding the support arms are
tightened securely (see page 4-4 for
Bimini top care information).
3-13
o
peratIon
3