Pre-Operation Checks; Check List - Yamaha AR240 HO Owner's Manual

3) If the engine oil level is below
the minimum level mark, perform
steps 4~6 to add enough oil so the
oil level is between the minimum
and maximum level marks on the
dipstick. If the engine oil level is
significantly above the maximum
level mark, have a Yamaha dealer
service the watercraft.
4) Remove the engine oil filler cap .

5) Pour engine oil into the filler hole.
Wait approximately 5 minutes until
the engine oil settles.
Tip:
The difference between the minimum
and maximum level marks on the dip-
stick is equal to approximately 1 quart
of engine oil.
6) Repeat steps 3~6 until the engine
oil is at the proper level.
7) Install the engine oil filler cap.

CHECK LiST

Before operating this boat, perform
the checks in the following check list.
Always follow the inspection and main-
tenance procedures and schedules
described in this owner's / operator's
manual.
WARNING
Failure to inspect or maintain the
boat properly increases the possi-

bility of an accident or damage to
the watercraft. do not operate the
watercraft if you find any problem.
if a problem cannot be corrected
by the procedures provided in this
manual, have the boat inspected by
a Yamaha dealer.
3-3
o
peratIon
pRE-OpERATiON
CHECKS
3