Passenger Seats - Yamaha AR240 HO Owner's Manual

2
f
eatureS

pASSENGER SEATS

The passenger seat on the port side of
AR240 and 242 Limited S models can
be positioned in two ways. It can be po-
sitioned flat as a bench seat or upright.
To position the seat with the upright
backrest, lift the strap provided at the
center of the seat and push the forward
end upright until it rests on the base.
Push down to latch the set in place
(see illustration directly above).
 Strap
 Latch
& f
unctIonS


To position the seat as a bench seat, lift
the latch on the underside of the seat.
Hold the seat by the straps provided
and pull the front of the seat forward
until it rests on the console lip.
SX240 and 242 Limited models are
equipped with a second swivel seat.
The controls are similar to the driver's
swivel seat except it does not adjust
forward and back.
SX240 / 242 LimiTEd SWiVEL SEAT
Two bow filler cushions are provided to
make a large flat area in the bow. One
of these cushions may also be used
as a backrest in the forward pass-thru
area.
2-18