Table of Contents
Advertisement
A
NLITE and AHCI Installation Guide
AHCI
The installation steps below will guide you in confi guring your SATA drive to AHCI
mode.
1. Enter the BIOS utility and confi gure the SATA controller to IDE mode.
2. Install Windows XP but do not press F6.
3. Download relevant RAID/AHCI driver fi les supported by the motherboard
chipset from Intel's website.
Transfer the downloaded
driver fi les to C:\AHCI.
4. Open Device Manager and
right click on one of the In-
tel Serial ATA Storage Con-
trollers, then select Update
Driver.
If the controller you select-
ed did not work, try select-
ing another one.
66
Advertisement
Table of Contents
