2
Hardware Installation
Installing QB701-B Series onto a Carrier Board
Important:
The carrier board used in this section is for reference purpose only and
may not resemble your carrier board. These illustrations are mainly to
guide you on how to install QB701-B Series onto the carrier board of
your choice.
1. The photo below shows the locations of the mounting holes and the bolts al-
ready fi xed in place.
2. Grasping QB701-B Series by its edges, insert it into the carrier board, and
you will hear a distinctive¨click¨ indicating QB701-B Series is correctly locked
into position.
Carrier board
QB701-B Series
20
Standoff Bolts
Mounting hole