Chapter 1 - Introduction; Specifications - DFI QB701-B Series User Manual

Chapter 1 - Introduction

Specifications

Chipset • Intel
• Supports USB interface:
Expansion
Interfaces - 7 Host and 1 Host/Client (selectable)
• Supports LPC Interface
• Supports SMB and I
• Supports 3 PCIe x1 interfaces
• Supports CAN-bus (Controller-Area Network) interface
Graphics
• Intel
• Supports up to 400MHz graphics frequency
• Ultra low power integrated 3D graphics
• High defi nition hardware video decoder and encoder engine
• Supports LVDS and SDVO interfaces
Audio • Supports High Defi nition Audio interface
LAN • Integrated Intel
• One Micrel KSZ9021RNI Ethernet PHY
• Supports 10Mbps, 100Mbps and 1Gbps data transmission
• IEEE 802.3 (10/100Mbps) and IEEE 802.3ab (1Gbps) com-
• Supports 1 SDIO/MMC
SDIO/MMC
• Supports SDA Standard Ver 1.0, SD memory card speci-
• Conforms to Secure Digital Host Controller (SDHC) speed
• Supports two Serial ATA interfaces
Serial ATA
• SATA speed up to 3Gb/s (SATA 2.0)
BIOS
• 16Mbit SPI Flash BIOS (UEFI BIOS)
Energy Efficient
• Supports ACPI 2.0/1.0 specification
Design
• Enhanced Intel
• Input: VCC_RTC, 5V standby, 5V
Power
• Provides a Trusted PC for secure transactions
TPM (option)
• Provides software license protection, enforcement and
password protection
Watchdog Timer • Software programmable from 1 to 255 seconds
EG20T PCH (Platform Controller Hub)
®
2
GMA 600
®
- LVDS: Supports pixel clock depths of 18/24-bit, single
channel, max. pixel clock of 80MHz, equates to
1280x768 @ 60Hz
- SDVO: Up to 160MHz pixel clock, equates to 1280x1024
@ 85Hz
PCH GbE MAC
®
pliant
fication Ver 2.0, SDIO card specification Ver 1.0, MMC Sys-
tem specification Ver 4.1
class 6
- One port shared with SSD
SpeedStep Technology
®
C interfaces
1
Introduction
9