Scan From The One Touch Button Panel; Features Of The One Touch Button Panel - Visioneer Strobe 500 User Manual

44 V S
ISIONEER TROBE
S O
CAN FROM THE
Scanning from the button panel on your computer's screen works like pressing a button on the scanner. The
scanner scans the item, then sends the image to the Destination Application indicated by the button's icon.
To scan from the One Touch Button panel:
1. Load the documents into the scanner.
2. Click on the One Touch icon in the Windows notification area (at the lower right corner of the screen.)
3. The One Touch Button Panel opens.
4. Click the button you want to use to scan.
5. The scanner starts scanning and the image is sent to the selected destination for the One Touch button you
are using to scan.
F O
EATURES OF THE NE
The One Touch panel is your on-screen set of controls for the scanner. From the panel you can access the
hardware settings for your scanner and configure the Scan button.
Click on the One Touch icon to open the panel.
The Detail View
The Title Bar
500 S U ' G
CANNER SER S UIDE
T B
NE OUCH UTTON
One Touch Icon
T B P
OUCH UTTON ANEL
The Button View
P
ANEL
The Hardware View